Etta Dining chair (Metal leg) Dimensions Width 48 cm Depth 55 cm Height 82,5 cm | 060 Rev 2 Important-Please read these instructions before assembly if you help or have damaged or missing parts, call the @ Customer Helpline: 0344 499 4686 or email:
/) Safety and Care Advice Impel Check you have all the components and tools tested on the front cover and pages 3 4. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed, Make sure you have enough space to layout the parts before starting. Please read these instructions fully before starting assembly Do not stand or put weight on the predict, this could cause damage.
If you have damaged or missing components, Components Pane[s call the Customer Helpline:0344 499 4686 or email; Please check you have all the panels listed below Note: There are ‘Batch Code’ labels where shown on the indicated items, these should be retained. arv | size co |\ PART 1 1 480x395x550 171 ‘> Z 1 460x435x460 ”n 3-6
If you have damaged or missing components, Components Fittings call the Customer Helpline:0344 499 4686 or email: Please check you have all the fixings listed below Note: The quantities below are the correct amount to complete the assembly. ' ~ In some case more fittings may be supplied than are required.
