Manual

19
Service Manual
Technical Information
LED
TIMER ON
LED
TIMER ON
LIGHT
LIGHT
10. TEMP button
11. TIMER OFF button
12. TURBO button
13. SLEEP button
14. LIGHT button
Introduction for special function
About AUTO RUN
About turbo function
About Blow over heat(This function is applicable to partial of models)
WIFI Function
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature. When the indoor unit rstly power
on it will display the setting temperature, if the temperature's displaying status is changed from other status to " ", displays the ambient
temperature, 5s later or within 5s, it receives other remote control signal that will return to display the setting temperature. if the users haven't
set up the temperature displaying status, that will display the setting temperature.(This function is applicable to partial of models)
After powered on, the setting temperature displaying is defaulted, (according to customers requirements to display, if there is no requirement
that will default to display the presetting temperature and there is no icon displayed on wireless remote control).
Press this button, (When displaying ), will display presetting temperature; (when displaying ) will display indoor ambient temperature,
current displaying status will not be changed. If current displays indoor ambient temperature, if received the other remote control signal,
it will display presetting temperature, 5s later, will back to display the ambient temperature.(This function is applicable to partial ofmodels)
Once press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink.
The method of setting is the same as for TIMER ON.
In Cool or Heat mode, press this button can turn on or turn off the Turbo function.
After turned on the Turbo function, its signal will be displayed. When switching the mode or changing fan speed, this function will be canceled
automatically.
Press this button, Sleep On and Sleep Off can be selected. After powered on, Sleep Off is defaulted. After the unit is turned off, the Sleep
function is canceled. After Sleep function set up, the signal of Sleep will display.In this mode, the time of timer can be adjusted. Under Fan
and Auto modes, this function is not available.
Press this button to select LIGHT on or off in the displayer. When the LIGHT on is set,the icon will be displayed and the indicator light in
the displayer will be on. When the LIGHT off is set, the icon will be displayed and the indicator light in the displayer will be off.
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD, the unit will be in accordance with the room
temp. automatically to select the suitable running method and to make ambient comfortable.
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the ambient temp. approachs the preset temp. as
soon as possible.
When the unit is running in Heat mode or Auto Heat mode, compressor and indoor fan is running, to turn the unit off, the compressor, outdoor
fan will stop running. The upper and lower guide board rotate to horizontal position, then the indoor fan will run at low fan speed, 10s later,
the unit will turn off.
Press "MODE" and "TURBO" button simultaneously to turn on or turn off WIFI function. When WIFI function is turned on, the " WIFI " icon will
be displayed on remote controller; Long press "MODE" and "TURBO" buttons simultaneously for 10s, remote controller will send WIFI reset
code and then the WIFI function will be turned on. WIFI function is defaulted ON after energization of the remote controller.(This function only
applicable for some models.)
General guide
1. After powered on, press ON/OFF button, the unit will start to run.
(Note: when it is powered on, the guide louver of main unit will close automatically.)
2. Press MODE button, select desired running mode.
3. Pressing + or - button,to set the desired temperature.
(It isunnecessary to set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select LOW, MID and HIGH.
5. Pressing button, to select the swing.