YPL3-10C Portable Air Conditioner User Manual Thank you for selecting this high quality air conditioner. Please be sure to read this manual carefully before using it.
CONTENT SAFETY…........................................................................................................... 3,4 INSTALLATION…............................................................................................. 4,5 PART NAME….................................................................................................... 5,6 CONTROL PANEL.................................................................................. ... ......7 REMOTE CONTROL...................... ...... .......
SAFETY PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS APPLIANCE. Only use this appliance for domestic purposes and in the way indicated in these instructions. Never use for any other purposes. Do not use the appliance outside and always place it in a dry environment. From time to time, check the cord. Never use the cord, the plug or the appliance when they show any sign of damage. The cord length of this product has been selected to reduce the possibility of being injured.
Power sources The AC outlet has to be in good working conditions. Do not plug in the appliance with an AC adaptor with no ground plug. Plug into the wall socket before switching on the appliance then press on the ON/OFF button. THE MANUFACTURER WILL NOT ASSUME ANY RESPONSIBILITY IN CASE OF NON ADHERENCE TO THESE INSTRUCTIONS. KEEP THIS USER MANUAL CAREFULLY. INSTALLATION Selection of installation location Keep the unit on a flat surface and dry place.
Incorrect mounting Preventing any bends of the exhaust pipe is very important. Incorrect mounting can prevent the machine from working correctly. Take care to prevent any sharp bows or bends of the exhaust hose. The exhaust air must flow freely。 WARNING The length of the exhaust hose is specially designed according to the specification of this product. Do not replace or extend it with your own private hose as this could cause mal-function. BE CAREFUL: Maximum length of the exhaust pipe is 59 inch.
9. Handle 15 Back 10. Exhaust air outlet vent 10. 11. Power cord 14. 12. Big filter 13. Small filter 14. Draining hole 15. Location to put the plug 11. Notice:When the air conditioner is not used or needs to be moved, recommend to place the plug on the location at the back panel. Easy to move and avoid fouling. As shown in the picture.
CONTROL PANEL COOL DRY FAN HIGH LOW 1. POWER button: press this button to turn on/off the unit. 2. SPEED button: press this button to select high, low fan speed 3. Timer: During Stand-by mode press this key to set automatic time on; During running mode press this key to set automatic time off. 4. DOWN button: press this button to set the temperature lower or higher when cooling; press this button to adjust time shorter or longer on Timer ; to switch Fahrenheit to Celsius. 5.
REMOTE CONTROL 1. Power 2. Celsius or Fahrenheit selection button 7 6 3. Fan button 4. Dehumidification mode button 8 5. Cooling mode button 9 6. Down button 10 7. Up button 8. High fan speed button 9. Low fan speed button 10. Sleep mode button 11 5 4 3 2 1 11.
OPERATION METHODS Cooling mode When the unit is turned on it will default to cool mode or press Mode button to choose cool mode, the Cool mode indicator will flash. ·Press UP or DOWN button to set room temperature between 60 to 86 F. ·Press FAN SPEED button (or High/Low button) to select high, low fan speed. Fan mode ·Press Fan button to choose Fan mode, the Fan mode indicator will flash. ·Select the fan speed by press SPEED button or press High / Low button directly. ·The temperature will remain the same.
WATER DRAINAGE This product has a self-evaporative system. The condensing water will be recycled to cool the condenser. This can not only improve cooling efficiency, but also save energy for you. · If the inside water is full, the display panel will display “FL”, and the compressor will stop running. ·Please turn the machine off and move the machine to the place where the water can be drained, then unplug the water-draining hole. After drainage, you can power it on and the machine will run again.
Storage ·Please drain the water. ·Keep the unit running in Fan mode for two hours until the inside of the unit is dry. ·Turn off the unit and unplug it. ·Clean the air filter and after dry it thoroughly, reinstall it. ·Remove the exhaust pipes and keep them carefully. ·Wrap the unit with the plastic bag and keep it in a dry place. ·If possible store unit in its original box.
SERVICE CENTER: 1908 Lynx Place , Ontario, CA 91761 Tel : (888)470-7342 Fax: 909- 974-2865 Hours : 8: 30AM -5: 00PM PST TO OBTAIN WARRANTY SERVICE: Contact CCH Technical Support Email:TechSupport@cchappliance.com Phone:(888)470-7342 From 8:30AM to 5:00PM Monday through Friday Pacific Time. WARRANTY PERIOD: Labor: 1 Year from the Date of Purchase. Parts: 1 Year from the Date of Purchase.