Quick Specs

PDT715SBN/SFN/SMN/SYN
GE Profile
™
Series Stainless Steel Interior Dishwasher with Hidden Controls
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Listed by
Underwriters
Laboratories
As an ENERGY STAR
®
partner, GE has determined
that this product meets the
ENERGY STAR guidelines
for energy efficiency.
For answers to your GE Profile
™
Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revision 5/19
ELECTRICAL RATING
Voltage AC................................................................120
Hertz..........................................................................60
Total connected load amperage................................6.6
Calrod
®
heater watts max................................800/500
For use on adequately wired 120-volt, 15-amp circuit
having 2-wire service with a separate ground wire.
This appliance must be grounded for safe operation.
INSTALLATION INFORMATION: Before installing,
consult installation instructions packed with product
for current dimensional data.
This Wall Area
must be Free
of Pipes or
wires
33-1/2" to 34-3/4"
Underside of
Countertop
to Floor
Figure A
Cabinets
Square
and
Plumb
24"
Min.
4"
6"
Plumbing and Electric Service
Must Enter Inside This Area
24"
Min.
24"
Typical
33-3/8" MIN.
adj to
34-5/8" MAX.
23-3/4"
29-7/8"
27-1/2"
4" (toekick)