Assembly Instructions Ul ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being Wrench eg easy and 5 being difficult). For some (included) products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES Jil. When lock or spring washer is used in Position each part correctly and insert Use cardboard or carpet area when an assembly, please make sure the screws or bolts into their respective assembling furniture to prevent rock of spring washer is placed holes by hand tighten or using the scratches .
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#A x PCs #C x PCs #D x PCs . Facing the back, align the ears (#4) . Onto each bolt end insert a flat washer insert 2 bolts (#A) info each ear turn right to frighten. to the per-drilled holes along the sides of the backrest Insert the ends of the bolts (#D) and then a hex nut Secure each by using the wrench (4B). #A x PCs #C x PCs #D Xx apes insert 2 bolts (#A) into the bottom of the backrest turn right to tighten.
Back Side #A x PCs #C x Apes #D x Bps I. Insert 1 bolt (#A) into the per-drilled hole on the top back of each arm Insert 3 jolts (#A) into the remaining holes on each arm turn right to tighten. 11. Insert the other ends of the bolts on the arms (#3) into the per-drilled holes along the sides of the seat Il. From within the seat (#1) apply a flat washer (#D) and then a hex nut Secure each by using the wrench Apply the top assembly onto the seat (#1) and insert onto the bolts (#A) on each side.
#E x PCs #1 Bottom Carefully place the chair onto a protected surface. Insert a gasket (#E) onto the threaded ends of each leg Insert the legs (#6) into the per-drilled hales on the bottom of the seat and turn right to tighten ASSEMBLY IS COMPLETED Page 6 of 6 Place pillows. Make sure all parts are firmly secured.
