Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench prelude, @ assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When dock or spring washer is used in an assembly, please make furthest iota or spring washer is placed between the garter flat washer and the head of the screw or bolt. Meme furniture comes with height adjustment knobs underneath each ieg.
' Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#C x PCs #D x PCs #E x PCs 1. Align the seat (#2) with the per-drilled holes on the backrest with legs il Prepare 2 bolt assemblies by FIRST inserting the jock-washer (#D} onto the bolt (#C) then the flat washer {#E) onto that SAME bolt 1Il. Insert inch the center holes on the seat {#2) secure using the Allen wrench Carefully place the backrest with legs on a protected surface 1.
1. Align the front right logs (#3) with the per-drilied holes on the seat 1, Prepare 4 bolt assemblies by FIRST inserting the lock washer onto the bolt (#B) then the flat washer (#E) onto the SAME bolt Hll. Insert into the front doters per-drilled holes on the seat (#2) and secure using the Allen wrench Carefully tum the completed chair upright. Make sure the chair is rested on a flat surface and does not feel lose or wobbly. If it does, double check that the bolts are secured and proper tightened.
