How to Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor WL550 Enhancer Sealer PRO is a solvent-based silicone water repellent sealer that will protect the surface from damage and dete-
rioration caused by water absorption, and enhance it with a matte wet look finish. The WL550 Enhance Sealer PRO works entirely below the
surface and will not leave behind a visible surface film. The WL550 is designed specifically for unsealed concrete, brick, pavers, and natural
stone where a color enhancement is desired.
Solids………………………………………………+/- 40%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………single coat
Foot Traffic..............................................................12-24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor WL550 is up to 1 year.
The Armor WL550 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Porous Surfaces: Up to 175 FT2/gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.
Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The
above coverage rates are estimates and will vary. Single coat application suggested.
Wet Appearance.......................................Clear
Dry Appearance........................................Invisible
VOC Content............................................Low VOC
Blush Resistance.......................................Excellent
Alkalinity Resistance....................................Excellent
Concrete Adhesion....................................Excellent
Armor WL550 Enhancer Sealer PRO
Foundation Armor
3 Howe Drive, Suite 2
Amherst, NH 03031
[phone]
FoundationArmor.com
For Professional Use
 Will enhance the natural coloring of the substrate to make it look
wet
 Will provide up to 3-5 years of life before the need for a recoat
 Breathable, low VOC.
 Will reduce deterioration caused by water absorption such as
cracking, spalling, pitting, staining
 Will reduce the formation of mold and mildew
 Will reduce freeze-thaw and salt damage
 Won’t leave behind a visible surface film
 Poured, broom finished, and troweled concrete.
 Pavers, brick, and block.
 Aggregate, natural stone, unglazed tile.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors and walls.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
 Meets OTC, CARB, LADCO & SCAQMD VOC restrictions  Dried coating is USDA accepted