ENGLISH ANALOG INSTRUCTIONS 1 2 Time Setting 1. Pull crown out to position 2. 2. Turn crown to set hour and minute hands to desired time. 3. Return crown to position 1.
DATE MODELS CLOSED 1 2 3 Rotate to set hour & minute hands. Date advances with each 24 hour rotation of hour hand. RAPID CORRECTION OF DATE Date Setting 1. Pull crown out to position 2. 2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction that moves the date varies on different watch models. Time Setting 1. Pull crown out to position 3. 2. Turn counter-clockwise to advance the time and continue until the day changes to the present day. 3.
2 EYE DAY/DATE MULTI-FUNCTION VX36 DATE DAY 1 2 3 Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance date hand. 3. Push crown back to position 1. Date and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
Multifunction 6P23 DATE 1 2 3 24-HOUR HAND Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. 24-hour hand will move with hour and minute hands. Keep turning to reach desired time. 3. Return crown to position 1. Date Setting 1. Pull crown out to position 2. 2. Turn crown counter-clockwise to set date. 3. Return crown to position 1.
Three Eye Multi-Function 6P29/6P79 DAY 1 2 3 DATE 24-HOUR Date Setting 1. Pull crown out to position 2. 2. Turn clockwise to advance the date hand. 3. Push crown back to position 1. Day and Time Setting 1. Pull crown out to position 3. 2. Turn clockwise to advance hour and minute hands. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
Chronograph Stopwatch VD55 (with date-VD57) 1/10 SECOND COUNTER MINUTE COUNTER A 1 2 3 B SECOND COUNTER Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2 and turn crown clockwise to set date to the previous day. 3. Pull crown out to position 3 when the second hand is at the 12:00 position, and turn clockwise until the present date is displayed. Continue turning crown to set the correct a.m./p.m. time.
Interval Timing 1. Press B while the chronograph is running. 2. Press B again to return to the chronograph. 3. Press A to finalize timing. 4. Press B to reset. Adjusting the Chronograph Hands to Zero Position If one or more chronograph hands are not in their correct zero (12:00) positions after pressing B (for example, following a battery change): 1. Pull crown out to position 3. 2. Press A to move the chronograph 1/10 second counter one increment; press and hold A for fast advance. 3.
Chronograph Stopwatch JS25/VD54 (with date-VD53) A MINUTE HAND 24-HOUR HAND 1 2 3 B SECOND HAND Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4. Pull crown out to position 3 when the second hand is at the 12:00 position. 5. Turn crown to set time. Note: 24-hour hand moves correspondingly with the hour and minute hands.
Chronograph Zero Reset 1. If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3. 2. Press A to move hands clockwise; press B to move hands counter-clockwise. 3. Return crown to position 1.
DIGITAL LED – BJ-3470 A B Normal Time Display 1. Press B to display time; press B again to change display mode. Mode sequence is time, date and seconds. 2. LED automatically turns off after 5 seconds. Time / Calendar Setting 1. In time display mode, press and hold A for 2 seconds to enter setting mode. 12/24hour format will begin flashing. 2. Press B to choose 12 or 24-hour format. For 12-hour setting, “P” will be displayed for afternoon/evening hours. For 24-hour setting, no symbol will be displayed.
PIN LINK DIAGRAM PIN PUSHER CHAIN NOSE PLIERS ARROWS BRACELET HOLDER Link Removal To remove a link from a pin link bracelet, you will need the bracelet holder, pin pusher, and chain nose pliers (see pin link diagram). 1. Open the clasp on the bracelet. 2. Look on the inside of the bracelet and locate the arrows near the clasp (see diagram). 3. Place the band into the appropriate size slot of the bracelet holder with the arrows pointing down (see diagram). 4.
USE PRECAUTIONS - RESISTANCE TO WATER Water Resistance Caseback Marking Water-related Use Depth Washing Hands — Shower, Bathing Swimming, Snorkeling Scuba Diving — WR — 3 ATM 3 Bar, 30 Meters 5 ATM 5 Bar, 50 Meters 10 ATM 10 Bar, 100 Meters 20 ATM 20 Bar, 200 Meters 30 ATM 30 Bar, 300 Meters 50 ATM 50 Bar, 500 Meters Always set the crown in closed position (the normal position). Tighten screw-lock crown completely.
