ELECTRIFIER Replace with LEDRSBSCPISWYCA INSTALLATION To order contact FAT ELECTRIC COMPANY Tol: & OP E RAT' N G Etna ot oo INSTRUCTIONS READ & SAVE IMPORTANT SAFETY INSTRUCTIONS Please read and understand this entire manual before attempting fo assembles, operate or install this product. This product must be installed in accordance with any applicable installation code(s) by a qualified electrician or person familiar with the construction and operation of the product and the hazards involved.
PACKAGE CONTENTS Before beginning installation of this product, make sure all parts are present. Compare parts with package contents fist and diagram. If any part is missing or damaged, do nit attempt to assemble, install or operate this product. COMPONENTS INCLUDED A | (1) MEDIUM BASE ADAPTER B | (1) RECESSED DOWNRIGHT C | {1} INSTRUCTION MANUAL PRODUCT ELECTRICAL RATINGS 120V WET LOCATION LISTED, ACCEPTABLE IN SHOWER INSTALLATIONS. Suitable for Type 1C Housings and Non-Ci Housings.
INSTALLATION INTO EXISTING RECESSED FIXTURE NOTE: For use with 5 in. and 6 in. recessed housings {(housing sold separately) Turn off the power at the switch and fuse box or circuit breaker. Remove the existing trim installed in the recessed housing (if necessary}. I applicable, slide the lamp holder bracket fo its upward maximum position.
INSTALLATION INTO EXISTING RECESSED FIXTURE WITH COMPATIBLE ORANGE CONNECTORS NOTE: For use with 5 in. and 6 in. recessed housings (housing sold separately} Turn off the power at the switch and fuse box or circuit breaker. Insert the torsion springs into the fixture housing brackets. Gently push the product up and torsion springs so they beg into expand and lift the product in place. Remove the existing trim installed in the recessed housing (if necessary). B Discard the medium base adapter.
HOW TO SELECT YOUR LIGHT COLOR Bright White 3000K Neutral White 200K 3500K Daylight ยง000K oD O NOTICE: The toggle switch s located on the back of the fixture, PICK YOUR FAVORITE LIGHT COLOR BEFORE INSTALLING = You can lock In one color temperature, change among multiple color temperatures, dim from memorize the last color temperature and reset automatically. = When the slide switch is set to SW (Soft White), the color temperature is set at 2700K.
