Instruction Sheet

1
Installation Instructions for
Secure the mounting plate to the junction box.
Install the candle tubes by sliding them over the sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all wires into the junction box, place the fixture base onto the mounting studs, and secure it in place by
screwing the cap nuts onto the studs.
1
2
1A
3
4
1
1
5
Thayer Semi-Flush Mount
1.0
SF350
SF350
Ceiling
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
LAMP
7
JUNCTION BOX
CANDLE TUBE
SOCKET
2
3
6
MOUNTING PLATE
MOUNTING STUD
CAP NUT
5
6
7
FIXTURE BASE
7