Use and Care Manual
21
OPERATIONS & ADJUSTMENTS
ADJUSTING THE BOOM
The Adjustable Boom (14) can be moved to a variety of different positions in order to
accommodate the height of the person using the inversion table.
To adjust the Adjustable Boom (14):
1. Loosen the Knob (33) and pull out and hold the Spring Knob (32).
2. Slide the Adjustable Boom (14) up or down until the desired height is just visible below the
tube connected to the Backrest Frame (3).
3. When the Adjustable Boom (14) is in the desired position, release the Spring Knob (32)
and slide the Adjustable Boom (14) slightly up or down until the Spring Knob (32) locks
into place with a “POP” sound.
4. Tighten the Knob (33) to secure the Adjustable Boom (14) before use.
WARNING: Make sure the Spring Knob (32) is inserted all the way through the Backrest Frame
(3) before getting onto the inversion table.
WARNING: The Knob (33) must be tightened every time the user height setting is changed for
additional stability and safety.