User manual

4.5. Recording Capacities 28
5. HARDWARE INSTALLATION AND CABLING 35
5.1. Rack Installation 35
5.1.1. Unpacking 35
5.1.2. Ventilation and Rack Mounting 35
5.1.3. Boards Checking 35
5.2. Rear Panel Description 36
5.2.1. Rear Panel Configurations 36
5.2.2. 6U Rear Panel Layout 36
5.2.3. 4U Rear Panel Layout 41
5.3. Video Connections 45
5.4. Audio Connections 45
5.4.1. Audio Channels 45
5.4.2. Digital Audio DA-15 Pinout 46
5.4.3. Analog Audio DA-15 Pinout 47
5.4.4. Monitoring Audio DA-15 Pinout 48
5.5. RS422 Connections 49
5.5.1. RS422 Connector Pinout 49
5.5.2. Redundant IPDP Serial Link 49
5.6. XNet Network 51
5.6.1. Introduction 51
5.6.2. Network Architectures 51
5.6.3. Required Conditions to Set up and Run XNet 53
5.6.4. Starting XNet 55
5.6.5. XNet Performances and Troubleshooting 55
5.7. Gigabit Network 56
5.7.1. Functional Overview 56
5.7.2. Backup of Clips 57
5.7.3. Restore of Clips 58
5.7.4. Important Rules 59
5.7.5. Switches 59
5.8. GPIOConnections 62
5.8.1. GPIO Connector Pin-Out 62
5.8.2. GP In Connections 62
5.8.3. GP Out Connections 65
6. BOARDS DESCRIPTION 67
6.1. Boards and Slots Configuration 67
6.2. V3X Video and Reference Boards 68
6.2.1. Description 68
6.2.2. CODConnectivity in SD and HD 71
6.2.3. CODConnectivity in 3D and 1080p Dual Link 75
6.2.4. CODConnectivity in 3D and 1080p Single Link 3G-SDI 77
IV Table of Contents
EVS Broadcast Equipment S.A. - January 2013 Issue 11.01.B