Installation Instructions

EN 12
Setting the clock
When the unit is connected for the first time, the time will flash ‘0·00’.
The correct time of day has yet to be set.
1. Press the + and - keys at the same time.
A cooking symbol will appear in the display. The dot in the middle of
the time display will also flash. You can now set the time of day.
2. Use the + and - keys to set the correct time
(while the dot is flashing).
3. Now wait 5 seconds; the time of day is confirmed automatically.
The current time appears in the display and the dot stops flashing.
Manually operating the oven
1. Select a temperature with the temperature knob and an oven
function with the function knob.
The thermostat light for the oven lights up and the oven
isswitchedon.
▷ Consult the table for more information on the various oven
functions that are available.
2. After the cooking time has elapsed, turn the temperature knob and
the function knob to ‘0’ to switch the oven off.
Please note: if the oven does not work, it is possible that the
electronic timer has been programmed (there is an ‘A’ in the
display). Cancel the program; see ‘Turning off the oven in
betweenuses’.
Oven functions
Oven light
Defrosting
You can use the fan of the convection oven for defrosting. The fan blows cold air.
Take the frozen products out of the packaging and place them in a dish. Slide the
dish onto the rack in rack position 3.
OPERATING THE OVEN