User`s guide

ESI Juli@ XTe
19
2. Config – Mouse Wheel
Controls the increment at which the volume is adjusted when using a mouse wheel. The adjustment
step is from 1 to 8.
3. Config – Latency
Adjust the latency (also often referred as buffer size) of the Juli@ XTe. A faster latency is achieved
by selecting smaller sample size which is ideal for software synthesizer and precise timing
recording. However, the latency is also limited by your system performance. For recording, you
would typically select a sample size between 64 ~ 512. Sample sizes of 48, 1024 and 2048 are used
in special circumstances of which 48 is reserved for very fast and reliable ASIO driver working
environments. The factory default setting is 256.
4. Config – Factory Default
It resets the Console to default settings.
5. Config - Always On Top
This enables to place the Console on top of every open window, which makes it easy to work with
Juli@ XTe and other music software simultaneously.
6. Config - Link
Links the L-R faders for stereo operation. Un-select the button, if you need to control the left and
right levels independently.
7. DirectWire
(explained later in detail)
Input Panel