Use and Care Manual

Page 11
Siren Advanced User Manual
Compatible Command Classes
Command Class Notes
Device Reset Locally V1 (5A) -
Powerlevel V1 (73) -
Battery V1(80) -
Association Group Information V1 (59) -
Z-Wave Plus Info V2 (5E) Returned Value: 01 07 00 0F 00 0F 00
Z-Wave Plus Version: 01
Role Type: 07 (Slave Sleeping Listening)
Node Type: 00 (Z-Wave Plus Node)
Installer Icon Type: 0F 00 (Siren)
User Icon Type: 0F 00 (Siren)
Version V2 (86) Returned Value: 06 04 05 02 39 10 00
Z-Wave Library Type: 06 (Routing Slave)
Protocol Version: 04 05
Protocol Sub-Version: 02 39
Application Version: 10
Application Sub-Version: 00
Manufacturer Specic V2 (72)
Returned Value: 02 1F 03 01 02
Manufacturer ID: 02 1F
Product Type: 03
Product ID: 00 88
Association V2 (85)
Group 1
Group 1 is the “Lifeline” group, which can hold ve members, typical-
ly including the main Z-Wave controller. The Siren sends this group a
Notication Report and a Binary Switch Report when the siren is turned
on or off. It also sends this group a Battery Report in reponse to Battery
Get commands and a Locally Reset Notication upon local reset.
Group 2
Group 2 can hold ve members, and the Siren sends a single command
to this Association Group, the Binary Switch Report, whenever the Siren
is turned on or off.
Group 3
Group 2 can hold ve members, and the Siren sends a single command
to this Association Group, a Notication Report, whenever the Siren is
turned on or off.
Table 3 - Command Classes
Compatible Command Classes