User Manual

APPLIQUES & ONLAYS
installation instructions
TOOL & MATERIAL
CHECKLIST
SAFETY INSTRUCTIONS
SPECIAL INSTRUCTIONS
AND NOTES
STEP BY STEP
INSTRUCTIONS
EXAMPLE
INSTALLATION DIAGRAMS
• It is highly recommended that you paint/nish our appliques with 100% acrylic
latex paint before you install them. Once installed, you can apply any necessary
touch-up paint/nish.
• Clean installation surface and back of appliques of all dirt and dust with a clean
cloth or sponge.
• Make sure that the surface and the back of the applique are completely dry
before
attempting installation.
1. Lay the applique face down on a soft surface that
will not scratch/dent the applique detail.
2. Apply a 1/2” bead of adhesive caulk all the way
around the back edge of the applique.
3. When pressing the applique up against the
surface, some adhesive caulk will seep out.
Smooth excess caulk around the applique with a
nger or the putty knife and apply extra caulk that
is needed to ll in any gaps.
4. Wipe off any excess caulk with a sponge or damp
rag.
5. Larger appliques will need to be installed with
nails in addition to the adhesive.
construction adhesive
caulk
caulking gun
nail gun
nishing nails
extra ne sandpaper
paint
Make sure to use the correct tools recommended.
Wear proper protective gear.
Follow xture, power tools, paint manufacturers’ instructions, and users manuals.
Use common sense and follow good construction practices.
We Can Help. Call [phone]
www.ekenamillwork.com
Industry leading manufacturer of urethane, PVC, wood, rustic, and metal millwork