Installation Guide

PAGE 1
installation instructions: FIBER THANE Figure 1 Figure 2 Figure Balustrade Installation Instructions 1. Installing Newel Posts (Figure 1} A. Use the installation kit or appropriate installation hardware. 8. Slide the rim collar down to cover up the hardware and glue the collar in place. ©. Glue the post cap in place with PL Premium. 2. Rails Lengths Need A. Measure the distance for each section of the balustrade you need. 8. Cut your top and bottom rails to the lengths that you measured for each section.
PAGE 2
installation instructions: BALUSTRADE Figure 4 Figure 4 5. Assemble Each Section (Figure 4) A. Apply a small bead of PL Premium adhesive to the bottom of each spindle. Insert the bottom of the spindle rods into the per-drilled holes on the bottom rail. Do this for every spindle in the section. B. Apply a small bead of PL Premium adhesive on the top of each spindle. C. Place the top rail over the spindles, inserting the spindle rods into the per-drilled holes on the top rail. 0.