ECO MINI Storm Relief Assembly

Hack Saw
Pipe Wrench
Pipe Cutter
Sand Paper
OR
3
1
4
5
7
6
9
5
6
77
8
8
6
6
6
11
6
2
12
1010
Apply 3
wraps of
1
Apply 3
wraps of
• Gather EcoSmart Mini-Tank, Installation Guide
and Owner’s Manual, necessary parts and
recommended tools.
• Refer to EcoSmart Mini-Tank, Installation Guide
and Owner’s Manual to properly install the
Temperature and Relief Valve.
• Apply 3 wraps of plumber’s tape to Mini-Tank
temperature and pressure relief valve.
• Apply 3 wraps of plumber’s tape to Mini-Tank
hot water outlet and cold water inlet.
• Using pipe cutter, cut six 2" sections of ½"
copper pipe. TIP: Hardware stores may cut pipe
for you when asked. Inquire when you purchase
your copper pipe.
• Using 2" section of pipe, attach Mini-Tank cold
water inlet to ½" Push-to-Connect Brass Tee
Fitting.
• Using 2" section of pipe, attach ½" x ¾" Brass
Push-to-Connect Washing Machine Angle Valve.
• Using a 2" section of pipe, attach ½" Push-to-
Connect Brass 90-degree Elbow Fitting.
• Apply 3 wraps of plumber’s tape to both
threaded ends of Shower Valve.
• Using pipe cutter, cut one 8" section of ½" pipe.
• Attach ½" Push-to-Connect x FIP Brass
90-degree Elbow Fitting to threaded end of
shower valve. DOWN?
• Attach ½" Push-to-Connect x ¾" FIP Brass
Fitting to Shower Valve UP Thread.
• Using a 2" section of ½" copper pipe connect
½" Push-to-Connect x ½" FIP Brass Fitting
to ½" Push-to-Connect x FIP Brass 90-degree
Elbow Fitting.
• Using a 2" section of pipe, attach ½" Push-
to-Connect Brass 90-degree Elbow Fitting to
EcoSmart Mini-Tank assembly and then attach
Shower Valve assembly.
• Attach shower handle using provided Allen
wrench.
• Attach shower head.
Temporary Shower Configuration
ITEM DESCRIPTION QTY.
Thread Sealing PTFE Plumber’s Tape 1
1/2 in. x 3/4 in. Brass Push-to-Connect
Washing Machine Angle Valve
1
EcoSmart 6-Gallon Electric
Mini-Tank Water Heater
1
Single Wall Mount Handheld
Shower Head
1
Single-Handle Tub and Shower Valve Kit 1
1/2 in. x 2 ft. Copper Straight Pipe
(1pcs at 8 in. & 6 pcs at 2 in.)
1
1/2 in. Push-to-Connect x FIP Brass
90 Degree Elbow Fitting
3
1/2 in. Push-to-Connect Brass
90 Degree Elbow Fitting
2
1/2 in. Push-to-Connect x FIP
Brass Adapter Fitting
1
1/2 in. Push-to-Connect x 3/4 in.
FIP Brass Adapter Fitting
2
1/2 in. Push-to-Connect Brass
Tee Fitting
1
Aerator to GHT Adapter 1
1
2
3
4
5
6
7
8
9
10
11
12
ECOSMART
®
MINI-TANK ELECTRIC WATER HEATERS
ASSEMBLY PARTS, TOOLS & DIRECTIONS
RECOMMENDED TOOLS
ASSEMBLY STEPS
RECOMMENDED PARTS
Sharing the Warmth
ecosmartus.com
03/21 FORM NO. ECO MINI-ASSEMBLY