- Eagle Fish Finder User Manual

floats, air bubbles, etc. Individual tree limbs

extending outwards from a group of limbs are

the hardest objects for the Fish ID feature to

distinguish from fish. You may see Fish ID

symbols on the screen when, in fact, there are

no fish. Practice with the unit when the Fish ID

feature is on and off to become more familiar

with Fish ID. To turn this feature off, press a

menu key until the Fish ID feature’s menu

appears as shown at right. Now press the

down arrow key. To turn it on, repeat the

above steps, but press the down arrow key

instead.

The Fish ID feature can’t be used when the unit is in the manual mode. If

you turn the automatic feature off, the Fish ID feature will automatically be

turned off, also.

FISHTRACK™

This sonar automatically displays the depth of a target when the Fish ID

feature places a fish symbol on the screen as shown below left. This

feature is automatically enabled when the unit is turned on. To turn it off or

on again, press a menu key repeatedly until the Fish Track menu appears

as shown below. Now press the down arrow key to turn it off. Remember,

Fish ID must be on in order to use the Fish Track feature.