User Manual

12
©
2014 DJI. All Rights Reserved.
Zenmuse Z15-GH4
(
HD
)
User Manual
Mounting a GH3 Camera onto the Z15-GH4
Mount a GH3 camera onto Z15-GH4 gimbal with the included HDMI cable made specifically for a GH3
camera. Follow the steps below to complete the mounting process:
1. Loosen the screws on the HDMI cap.
Mounting a GH3 Camera onto the Z15-GH4
2. Unplug the GH4 HDMI cable from the board. Then plug the specied HDMI cable for a GH3 camera into
the board. Be aware of the HDMI cable connection. Ensure that the connector is used as shown below:
3. Re-install the HDMI cap and tighten the screws to nish.
Screw
HDMI Cap
Board
HDMI cable for GH3
The following diagram shows how the shutter control works.
TX
2-Position Switch
TX Command TX Command TX Command
Wireless
RC Receiver
3-Pin Cable
Internal Cable
HDMI-HD/AV
Module
Gimbal
Camera
GCU
Shutter Button
2-Position
Switch Channel
SHUT
Camera Shutter Control Cable