Instruction Manual

12
Securing the Child
1) Make sure booster seat is properly positioned and installed on vehicle seat as per the
instructions in pages 12–13.
2) Properly position child: sitting upright and all the way
back in the booster seat.
3) Fasten seatbelt across child: Lap portion of seatbelt
should rest within both red lower belt guides. Diagonal
shoulder portion should rest over child’s shoulder.
4) Make sure seat belt is not twisted and lays flat across
child’s lap, torso and shoulder.
5) Tighten the seatbelt by pulling the diagonal shoulder
belt portion in the direction of the arrows.
6) Confirm seatbelt buckle is in correct position (see
bottom of page 13).
WARNING: If lap portion and diagonal portion of
seatbelt are not positioned correctly, the booster
seat is not properly installed:
• Diagonal portion of seatbelt should lay over the shoulder
and NOT touching the neck.
• Lap belt position should be forward and as low as possible
over child’s pelvis and contacting the upper thigh.