IP POWER 9258 USER MANUAL IP POWER 9258 USER MANUAL
IP POWER 9258 USER MANUAL USER MANUAL IP POWER 9258 Version: V1.34 2006.03 -1- VER. X.
IP POWER 9258 USER MANUAL Warning: Any changes to this equipment without permission may cause damages to your equipment! This equipment has been proved by CE & FCC to can be prevented from the influence of harmful electronic jamming in normal business use condition. IMPORTANT NOTICE 1. We have no responsibility for the possible damage caused by improper usage or abnormal working environment. 2. Do not use I POWER 9258 in strong shaking condition. 3. Please contact the dealer If I POWER works improperly.
IP POWER 9258 USER MANUAL Table of Content 1. INTRODUCTION...........................................................................................................4 FEATURES .......................................................................................................................... 9258 FUNCTION DESCRIBE ................................................................................................. 2.SPECIFICATION...........................................................................
IP POWER 9258 USER MANUAL 1. Introduction IP POWER 9258 is a web controller which can be easily used in the industry field. With the remote network control technology, user can control or query the power supply of equipment. User can do this in any computer connected to the internet or local area network, there is no special program needed, also there is no need to open the external case of the computer.
IP POWER 9258 USER MANUAL 2. Specification Package contents One set of 9258: * 9258T -For EU / AU / UK * 9258S – For USA / TW / JP Option; RJ45 (Cat5) net wire Option : Power Cable Minimum System Requirements Intel Pentium III 300MHz or above/compatible AMD CPU WINDOWS operating system (IE5.
IP POWER 9258 USER MANUAL 3. Interface Description IP Power 9258 Front interface shown below: From left to the right 1. RESET: self-protect AC reset button. IP Power 9258 can cut off the power supply of outlets automatically if there is a shortcut or current overload. After user having solved the problem, push the reset button, the AC power supply will become normal. 2. LED: 4 LED indicator lights. If the LED is on, means the corresponding outlet is power on. 3.
IP POWER 9258 USER MANUAL 4. Hardware & Software installation Before you star to use IP Power 9258, please follow the steps below Check the package to make sure the contents is complete. Prepare one Ethernet HUB or Router Check the voltage of the power supply to make sure it is AC 110-240 volt Please confirm the specification of your power cable. IP Power 9258S : for 220-250V, please use the 10A power cable. IP Power 9258T : for 100-120V, please use the 15A power cable.
IP POWER 9258 USER MANUAL 5. Initial Settings Initial setting through the Ethernet 1. Open attached CD and save IPEDIT.exe in to your Hardisk , execute IPEdit.exe 2. All the IP 92XX series, like IP Power 9258 IP Kamera 9000 series/IP Video 9100 series in the same subnet of the Ethernet will be found and be display in the window by the software. The default name of IP Power 9258 is IP 9258 . 3.
IP POWER 9258 USER MANUAL 2. IP Power 9258’s default setting is fixed IP address: 192.168.10.100. The IP address of your computer should in the same subnet with that of IP Power 9258’s, so that you can open the control web page. In the figure above, the IP address of IP Power 9258 is 192.168.100.168. You can make sure the IP address of your computer first, then use the ipedit.exe to modify the IP address of IP Power 9258.after that, your computer can connect to the IP Power 9258. 3.
IP POWER 9258 USER MANUAL 6. Control and settings through the Internet Explore) Type the new IP address of IP Power 9258 in the address field and you can enter the login web page. Input the default password 12345678, or the password set by you, click OK, and you can then enter the Web Control page.
IP POWER 9258 USER MANUAL Power Supply State Query Click the “ Set Power” button on the left, the page will be refreshed. The state of each electric outlet will be displayed in column control. System Settings of 9258 User can set the password, IP address, e-mail address, timer setting, online firmware update, and the time of 9258 through the system settings. 1. Setting the password for IP Power 9258 : Click the “ Change password “ button on the left you can enter the change password page.
IP POWER 9258 USER MANUAL * Http Command Verification : setup the control possibility from HTTP command or SDK (VB & VC) 1. Select “ Cookie +Base64 “ : enable Http command & SDK control 2. Select “ Cookie “ : enable Http command & SDK control 2-1 IP address Settings: Ethernet (LAN ) and Internet(WAN) 2-1-1 Local Area Network (LAN) : In LAN, you can set a fixed IP address or gain it from a DHCP server automatically.
IP POWER 9258 USER MANUAL 3. EMAIL SETTINGS: When you finished the e-mail settings, you can set to let IP Power 9258 send its IP address automatically. For example: * Mail Server: abc.com * Pop3Servcer : cdef.com * Password : XXXXXXXX * Sender: 123@abcd.com * Receiver 1: 456@abcd.com * Receiver 2: 789@efgh.com * Receiver 3: * Subject: 9258 IP address * MailBody : Hello 1.) Mail Server : the server sends e-mail out. Please make sure the server is an available mail server. 2.
IP POWER 9258 USER MANUAL 4. Control the IP Power 9258 through Time Schedule : User can control the time when 9258 starts or stop through preset time schedule. Click the power schedule on the left of the page; you can select enter the time schedule setting If user wishes to control the power in one outlet of IP Power 9258, you can fill in the time in the power control column and choose on or off. Support parameter of operate schedule : Disable Just Once Every day Work Day : every Monday to Friday.
IP POWER 9258 USER MANUAL Please refer following the NTP server IP address : * 131.246.9.116 * 139.18.25.34 * 128.176.191.9 Note: To work NTP, please do set up in e-mail and have to receive e-mail from 9258. 7. Wake on Lan ( WOL): Remote Wake up PC by MAC address in Ethernet ( LAN ) Use Network port (RJ45), you can wake PC on WAN by PC `s MAC address. Wake On LAN (WOL) premise: (1) The main board needs to support “ WOL “ function. There must be a port to connect to your network card.
IP POWER 9258 USER MANUAL Note: 1. If the Network card is not onboard card, it needs to connect with your Main board by cable. Please refer your network card connection 2. You can get your MAC address in PC , please refer following pictures : Go to Network sign Status Support Details Then the value in Physical Address “ is the PC` MAC address.
IP POWER 9258 USER MANUAL 8. GPRS for Cell Phone : Support WAP. IP POWER 9258 support GPRS function, you can use cell phone (with online function), We support : Motorola V878 , Sony Ericsson T630 & K700i. . To setup the online device ( real IP address) as operate in browser .: 1) Address setting : key in your online IP address. For example : http://65.59.37.123 the interface is same as in IE(Internet Explore) . 2) The IP Address must be real IP address and can be work on Internet..
IP POWER 9258 USER MANUAL 7. Check 9258 status though SNMP 9258 support SNMP V1 and V2 , user can use snmp program to get the status of each port in 9258.
IP POWER 9258 USER MANUAL 8. Control and Settings Through HTTP Order User can control the 9258’s action directly though the HTTP orders. The format of the HTTP order is : http://username:password@XXX.XXX.XXX.XXX/Set.cmd?CMD=***Power+para1=*+p ara2=*+para3=*…… Explanations of each part of the order: Username : 9258’s username, default username is admin Password : 9258’s password, default password is 12345678 XXX.XXX.XXX.
IP POWER 9258 USER MANUAL * Schedule Control : User can use Http command to arrange the 9258 operation in specific time ，http command format as follow: http://username:password@XXX.XXX.XXX.XXX/Set.cmd? CMD=SetSchedule+Power=**+YY=****+MM=**+DD=**+HH=**+MN=**+SS=**+PARAM =****+ONOFF=* Explanations of each part of the order: Username : 9258’s username, default username is admin Password : 9258’s password, default password is 12345678 XXX.XXX.XXX.
IP POWER 9258 USER MANUAL 9. FAQ Q1: I forgot the password and can not enter the administration page now, what can I do? A1: Use username " super user " when log in webpage and then click "OK " turn power off for few second and then turn on ON . 9258 will to set back to default password. ( There is space between super and user. ) Q2: Why the on/off operation can work immediately? A2: if you operate the IP Power 9258 in Ethernet, the operation will work immediately.
IP POWER 9258 USER MANUAL Step 2 : Open amend webpage “ipcontrol “ html file : Step 3.
IP POWER 9258 USER MANUAL Step 5. After amend the other 9258 webpage you plan to amend . Please open program “Make9258Html “ in 9258 web page SDK and just press” make html patch”. Step 6 . There will be a new file “ Update_2006-01-11.bin” which is the BIN file include the amend webpage. Please follow 9258 update procedure to update the firmware BIN file . Please note the Update procedure must be done in port 80. - 23 - VER. X.
IP POWER 9258 USER MANUAL Note: program “Make9258Html.exe “ and amend webpage must in same file. * If update fail and can not get IP address by IP EDIT , please use RS232 jack ( DB 9 Cable) connect with the PC and 9258, and you can get IP address to log-in and update again. Please refer follow step: 1.POWER OFF the 9258 2. Use DB9 cable connect to the COM1 of PC and the RS232 of 9258 3.
IP POWER 9258 USER MANUAL 6. Use this IP address to update again. We supply original firmware V1.22 for update f 7. Log tin this address to update again. 8. If still can not finish update successful, please check if create BIN file too big . If need to ship BIN file, please use bin file V1.22.bin in SDK to update back to factory version. - 25 - VER. X.
