User Manual

5
Features
Top Panel
11
1
2
3
4
5
6
7
10
12
13
1
2
3
4
5
6
7
10
12
13
1
2
3
4
5
6
7
10
12
13
1
2
3
4
4444
4444
5
6
7
8
9
888
10
12
13
14
15
15
16
17
18
19
20
21
22
23
24
25
26
26
27
28
29
29
30
30
31
32
33
34
35
36
37
38
40 41
42
43
45
44
39
21
46
47 48
49
1. Input Select: Turn these knobs to select the desired audio source for each channel:
• Digital: the digital ins
• Line: the line inputs
• Phono: the phono inputs
• USB: a computer connected to a USB port. Use the USB 1/2 switch to select USB
Port 1 or USB Port 2. When set to USB Port 1 (and with a computer connected to
that port), the channel will control the corresponding channel in your software.
• DVS: a computer connected to a USB port while using control vinyl with a digital
vinyl system
2. USB 1/2: When the Input Select knob is set to USB, use these switches to select USB
Port 1 or USB Port 2 as the source. When set to USB Port 1 (and with a computer
connected to that port), the channel will control the corresponding channel in your software.
3. Level: Turn these knobs to adjust the level of the pre-fader, pre-EQ audio signal for each
channel.
4. EQ (High, Mid, Low): Turn these knobs to boost or cut the high, mid-range, and low
frequencies for each channel. You can use the Utility menu to set the type of EQ, which
determines the minimum (cut) and maximum (boost) values (see Operation > Utility Menu
> EQ).