Datasheet

Length
Width
Material
Thickness
12
6
45°
10
IP66 Seal:
Neoprene closed cell sponge specification-
ASTM D1056.68-05-96A 1/2 2A2
Hardness shore: 50
Density: 96Kg.m3
Compression deflection 25: 48 Kpa
Compression set: <35%
Tensile strength: 690 Kpa
Elongation: 125%
Water absorption: <5% max
Colour: Black
Adhesive backing: 05-96ASAB
Material Thickness: 3mm
Service Temperature
Constant High / low: +93
C / - 40 C
Intermittent High / low: +121 C / -57 C
For maximum seal efficiency
the seal is designed for a once only application
Plain Standard Screw:
Thread : M3.5 x 0.6 x 12mm
Head detail: Recessed Pozi drive, Countersink head
Material: SUS304-2B. uk standard 304S31
Finish: Stainless steel
IP66 Neoprene Foam Seal
+ Screws For Plain & Flanged
TITLE
IP66 Seal & Screw Kit
DRAWING NO.
Release
01
ISSUE
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETRES.
TOLERANCE:
NO DECIMAL PLACES
Xmm
1 DECIMAL PLACE
Xmm
2 DECIMAL PLACES
Xmm
ANGULAR TOLERANCE:
1
DRAWN BY
APPROVED BY
SPB
THIRD ANGLE PROJECTION
SCALE 1:1
A4
SHEET 1 OF 1
See Note
See note
MATERIAL
FINISH
DEBURR AND BREAK
SHARP EDGES
IF IN DOUBT ASK
DO NOT SCALE DRAWING
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ALPHA 3 MANUFACTURING .
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF
ALPHA 3 MANUFACTURING IS PROHIBITED.
DEM Manufacturing, Deltron Emcon House
Hargreaves Way, Sawcliffe Ind. Park,
Scunthorpe, North Lincolnshire, DN15 8RF, UK
-
A
D
E
C
B
1
4
6
2
5
7
3
B
C
D
E
A
-
Die-Cast enclosures
WC
Tel No. [phone] Website www.dem-uk.com