Users Guide

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.1 Introduced on the S4810.

6.2.1.1 Introduced

clear ip msdp sa-cache

Clears the entire source-active cache, the source-active entries of a particular multicast group, rejected, or local source-active entries.

Syntax

clear ip msdp sa-cache [group-address | rejected-sa | local]

Parameters

group-address Enter the group IP address in dotted decimal format (A.B.C.D.).

rejected-sa Enter the keywords rejected-sa to clear the cache source-active entries that are

rejected because the RPF check failed, an SA lter or limit is congured, the RP or MSDP

peer is unreachable, or because of a format error.

local Enter the keyword local to clear out local PIM advertised entries. It applies the

redistribute lter (if present) while adding the local PIM SA entries to the SA cache.

Defaults Without any options, this command clears the entire source-active cache.

Command Modes EXEC Privilege