Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1671

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.0) Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux

(PMUX) mode only.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.8.0 Introduced on the S4810.

Usage Information

When you create a VLT domain on a switch, the Dell Networking OS automatically creates a VLT-system MAC

address used for internal system operations.

To recongure the default MAC address for the domain, use the system-mac command. The MAC address must

be in the nn:nn:nn:nn:nn:nn format. Also recongure the same MAC address on the VLT peer switch.

unit-id

Congure the default unit ID of a VLT peer switch.

Syntax

unit-id [0 | 1]

Parameters

0 | 1 Congure the default unit ID of a VLT peer switch. Enter 0 for the rst peer. Enter 1 for

the second peer.

Defaults Automatically assigned based on the MAC address of each VLT peer. The peer with the lower MAC address is

assigned unit 0; the peer with the higher MAC address is assigned unit 1.

Command Modes VLT DOMAIN

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.