Users Guide
Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information An aggregate output QoS policy applies to all outbound port trac. An aggregate output QoS policy can coexist
with per-queue output QoS policies. If the rate shape exists in both aggregate and per-queue qos-policy, minimum
of 2 take eect. Some of all Queue-rate will not exceed aggregate.
Related Commands
• policy-map-input — creates an input policy map.
• policy-map-output — creates an output policy map.
policy-map-input
Create an input policy map.
S3048–ON
Syntax
policy-map-input policy-map-name cpu-qos | [layer2] [cpu-qos]
To remove an input policy map, use the no policy-map-input policy-map-name cpu-qos |
[layer2] [cpu-qos] command.
Parameters
policy-map-name Enter the name of the policy map in character format (32 characters maximum).
cpu-qos Enter the cpu-qos keyword to assign this ACL to control plane trac only.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2 Class Map. The default is
Layer 3.
cpu-qos (OPTIONAL) Enter the keyword cpu-qos to create an input policy to be used to rate-limit
control-plane trac (CoPP).
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
1264 Quality of Service (QoS)