Users Guide
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information
Use this command to congure the protocol-specic resolution value that converts the actual metric of an IPv6
route in the routing table to a scaled metric in the range 0 to 255.
The UP/DOWN state of a tracked IPv6 route is determined by the user-congurable threshold (the threshold
metric command) for a route’s metric in the routing table. To provide a common tracking interface for dierent
clients, route metrics are scaled in the range 0 to 255, where 0 is connected and 255 is inaccessible.
The protocol-specic resolution value calculates the scaled metric by dividing a route's cost by the resolution value
set for the route protocol:
• For ISIS, you can set the resolution in the range 1 to 1000, where the default is 10.
• For OSPF, you can set the resolution in the range 1 to 1592, where the default is 1.
• The resolution value used to map static routes is not congurable. By default, Dell Networking OS assigns a
metric of 0 to static routes.
• The resolution value used to map RIP routes is not congurable. The RIP hop-count is automatically multiplied
by 16 to scale it. For example, a RIP metric of 16 (unreachable) scales to 256, which considers the route to be
DOWN.
Related Commands
• threshold metric – congure the metric threshold used to determine the UP and/or DOWN state of a tracked
route.
• track ipv6 route metric threshold – congure object tracking on the threshold of an IPv6 route metric.
998 Object Tracking