Users Guide

stack-unit slot-
number
(OPTIONAL) Enter the keyword stack-unit then the slot number. The range is from 0
to 5.
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Added support to display the interface congurations corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Example
Dell# show interfaces status
Port Description Status Speed Duplex Vlan
Gi 1/1 Up 1000 Mbit Auto --
Gi 1/2 Down Auto Auto 1
Gi 1/3 Down Auto Auto 1
Gi 1/4 Down Auto Auto --
Gi 1/5 DellPort Up 1000 Mbit Auto 30-130
Gi 1/6 Down Auto Auto --
Gi 1/7 Down Auto Auto --
Gi 1/8 Up 1000 Mbit Auto 1502,1504,1506-1508,1602
Gi 1/9 Down Auto Auto --
Gi 1/10 Down Auto Auto --
Gi 1/11 Down Auto Auto --
Gi 1/12 Down Auto Auto --
Gi 1/13 Down Auto Auto --
Gi 1/14 Down Auto Auto --
Gi 1/15 Down Auto Auto --
Gi 1/16 Down Auto Auto -Dell#
Related Commands
• show interfaces — display information on a specic physical interface or virtual interface.
Interfaces 645