Setup Guide

no shutdown

DellEMC#show dot1x interface tengigabitethernet 2/1

802.1x information on Te 2/1:

------------------------------------------------------

Dot1x Status: Enable

Port Control: AUTO

Port Auth Status: AUTHORIZD(MAC-AUTH-BYPASS)

Critical VLAN Enable

Critical VLAN id: 300

Re-Authentication: Disable

Untagged VLAN id: 400

Guest VLAN: Enable

Guest VLAN id: 100

Auth-Fail VLAN: Disable

Auth-Fail VLAN id: NONE

Auth-Fail Max-Attempts: NONE

Mac-Auth-Bypass: Enable

Mac-Auth-Bypass Only: Enable

Tx Period: 3 seconds

Quiet Period: 60 seconds

ReAuth Max: 2

Supplicant Timeout: 30 seconds

Server Timeout: 30 seconds

Re-Auth Interval: 3600 seconds

Max-EAP-Req: 2

Host Mode: SINGLE_HOST

Auth PAE State: Authenticated

Backend State: Idle

802.1X