EasyCard for DriveRight Installation Manual
Contents 1. EasyCard Card Reader and DriveRight Trip 500AL display 2. Immobilizer relay and cable (optional to install) DriveRight Trip 500AL display EasyCard Card Reader Immobilizer Relay Immobilizer Cable © AAN - DriveRight Adaptive Activity Network BV Akeleilaan 1a NL-3333 GA Zwijndrecht The Netherlands Phone +31 78 6194527 Fax +31 78 6196711 E-mail: easycard@driveright.cc www.driveright.
Introduction Installing the EasyCard Card Reader The EasyCard has a special, easy to install, design. These installation instructions should provide enough information for a professional automotive mechanic to quickly and successfully mount, and connect, the equipment. This installation procedure describes how to install the immobilizer relay in the vehicle. If the vehicle will be used without the immobilizer function, there is no need to install the immobilizer relay.
Specifications Immobilizer Cable Wire from ignition Immobilizer Relay C1 C2 Ground Wire to relay of starter motor Testing proper functioning Follow this procedure to test the EasyCard Card Reader: C C Do not insert a card in the EasyCard Card Reader. Try to start the engine. If all connections are correct, the engine will not start.
