Operation Manual

7-174 Magellan

8500Xt Scanner

UPC/EAN Reconstruction

Enables/disables the ability of the scanner to decode a class of UPC/EAN

labels with voids. The label voids may be caused by printing defects or

physical damage. This feature may be helpful in environments with in-

store printed labels.

CAUTION

To set this feature:

1. Scan the SWITCH barcode.

2. Scan either the enable or disable barcode below. You’ll need to cover

any unused bar

codes on this and the facing page to ensure that the

scanner reads only the barcode you intend to scan.

Complete the programming sequence b

y scanning the SWITCH barcode.

UPC/EAN RECONSTRUCTION = DISABLE

UPC/EAN RECONSTRUCTION = ENABLE

Enabling this feature increases the potential of misreads.