Installation guide

Planning the Installation
Selecting the Location Model |, B c
Number
* Carefully check the location where the oven is to be FO127
installed. The oven should be placed for convenient 25 14 27” 56 14”
access, but away from drafts that may be caused by MOH127 (64.8 cm) | (68.6 cm) | (143.5 cm)
doors, windows, and heating, ventilation and air condi- MOV127 | 97° 7/46”
tioning outlets.
FO130 (69.7 cm)
* Make certain that electrical power can be provided in
4f7 n 479
the selected location. Be certain that proper clearance MOH130 28% 30 62%
; ; as (72.4 cm) | (76.2 cm) | (158.8 cm)
is provided for the oven door when it is in the open MOV130
position.
. EO227
Cabinet Cutout 25 4 27”
MOH227 (64.8 cm) | (68.6 cm)
* Plan the installation so that all minimum clearances are | \ygyo07 ,
met or exceeded. Cutout dimensions shown provide 50 9/16 NA
minimum clearances, unless otherwise noted. E0230 | (128.4 cm)
4s n
* The specified minimum cabinet depth and width must MOH230 72.4 em) 76.2 om)
be provided. The cabinet depth and width must com- , ,
; MOV230
pletely enclose the recessed portion of the oven.
* Cabinet cutout dimensions must be used as indicated.
Cutout tolerances: +1/16 (1.6 mm), -0, unless otherwise stated.
fg
K
Cc
>|
Recommended Recommended
electrical electrical
location location
| ‘Com ‘|
i { 4
1°(2.5 0m . 1 (2.5 em) min.
eet Single Wall clear to ! Double Wall
bottom Oven Cutout bottom of Oven Cutout
of door A door
<¢—
B
Alternate
i
Popa nnn mm electrical
/
3/4”
(1.9
cm)
location
1
A
/ support platform i
\ ‘ Y |
gt B >
a :
1%! (4.5 em) min. 6 6
clear to top of 1% (4.5 cm) min. i
door for heat , clear to top of Loto LLL!
exhaust 31 1/4" (79.4 CM) — door for heat / ,
recommended exhaust / 3/4” (1.9 cm)
(may be altered) \ // support platform \
v
i 9 5/8” (24.4 cm)
@
recommended
4* typical toe kick (shown) 4* typical toe kick (shown) (may be altered)
f
6 dacor