Use and Care Manual

10
To clean:
1. Fill the water reservoir to capacity with a
mixture of ¹⁄
³
white vinegar and ²⁄
³
water.
2. Press and hold the CLEAN icon. When it
starts to flash, the coffeemaker is in Clean
mode. Release the icon.
3. When the cycle is completed, 5 beeps will
sound and the coffeemaker will shut off.
4. If the CLEAN icon illuminates once more,
repeat the cleaning procedure with a fresh
solution of vinegar and water. NOTE: One
cleaning cycle is usually sufficient.
5. When the CLEAN icon remains off, run one
cycle with a full reservoir of fresh, cold water
to rinse the unit.
6. Return the charcoal water filter to the holder
inside the water reservoir and your
coffeemaker is ready to brew!