Installation Instructions

13
Reseal WRB To Door
1. Apply a generous, continuous bead of silicone
sealant on all sides of the door where the weather
resistant barrier will lay when folded down on top
of the weather barrier self-adhering tape (FIGURE
6).
2. Piece by piece, untape and fold down the
weather resistant barrier over the weather barrier
tape (FIGURE 7). Use a rubber roller, on top of
the WRB, to smooth and spread sealant applied
earlier.
3. The diagonal seams in the weather resistant
barrier must be sealed (FIGURE 8).
Cut and apply self-adhering weather barrier tape
as shown in (FIGURE 8) to seal the seams. Cut
tape big enough to overlap seams by at least 1" on
all sides.
Weather Barrier Tape Application – DP Installations (cont.)
FIGURE 6
APPLY SEALANT BEFORE
FOLDING WEATHER
RESISTANT BARRIER
BACK INTO PLACE
SEAL ALL DIAGONAL SEAMS
FIGURE 7
FIGURE 8
WEATHER BARRIER
SELF-ADHERING TAPE
CUT TO FIT CORNER
WEATHER BARRIER SELF-ADHERING
TAPE UNDER WRB
WEATHER RESISTANT
BARRIER OVER SHEATHING
AND WEATHER BARRIER
SELF-ADHERING TAPE