Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Alto Leaning Bookcase

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Flat head screwdriver

Electric drill & 5/8" drill bit

(for drywall installation) &

3/16" drill bit (for masonry)

Hammer

1 Lay left and right side rails on a flat surface with

flanges facing each other, oriented as shown. Note the

location of the holes on the flanges to determine the

orientation of the rails.

20 - large screws

1 - small screw

1 - medium screw

1 - wall anchor

1 - toggle bolt

1 - bracket

COMPONENTS

2 - side rails

(1 left, 1 right)

1 - top shelf

1 - 2nd shelf

1 - 3rd shelf

1 - 4th shelf

1 - bottom shelf

Bottom

(flange is

closest

to end)

Top

RIGHT RAIL

LEFT RAIL

4 - tube caps

Back

Front

Back

Front

Page 1 of 3

Made in China - r02

ALTO LEANING BOOKCASE

Customer Service 800.967.6696 | www.crateandbarrel.com

Thank you for purchasing the Alto Leaning

Bookcase. This page lists all the contents included

in the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

Missing hardware? Please call 800.606.6387 for replacements.

Summary of content (3 pages)

PAGE 1
ALTO LEANING BOOKCASE HARDWARE 1 - small screw 1 - wall anchor 1 - medium screw 1 - toggle bolt 20 - large screws 1 - bracket 4 - tube caps Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Alto Leaning Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ALTO LEANING BOOKCASE 6 With the assistance of another adult, position assembled unit against wall in desired location. Verify back edges of shelves all touch the wall as illustrated. Bracket attached to the 3rd shelf should also be touching the wall. Mark location of the bracket mounting hole on the wall. Move shelf out of workspace. Mounting to masonry wall: Drill a 3/16" diameter hole at the mark. Insert wall anchor into hole and gently tap until flush with a hammer.
PAGE 3
ALTO LEANING BOOKCASE NOTE: Do not over tighten the screws. Top Shelf (underside) BOTTOM 2 Insert tube caps into ends of both side rails. 3 Verify bottom flanges face each other. Using a phillips head screwdriver, attach top shelf with 4 large screws by passing screws through flange and into shelf's pre-drilled holes. Secure all screws but do not over-tighten.