Specification Sheet

B3106 - Vee Bottom Clevis Hanger (TOLCO Fig. 1V)
Rod Take-Out D Adjustment E Design Load Approx Wt./100
Part No.
in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)
B3106-2 3
5
/16" (84.1) 1
5
/8" (41.3) 150 (.67) 60 (27.2)
B3106-4 4
13
/16" (122.2) 2
3
/16" (55.6) 150 (.67) 143 (64.8)
Pipe Size Rod Size BC
Part No.
in. (mm) A in. (mm) in. (mm)
B3106-2
1
/2" to 2" (15 to 50)
3
/8"-16 5
15
/16" (150.8) 4
1
/16" (103.2)
B3106-4 2
1
/2 " to 4" (65 to 100)
1
/2"-13 9
3
/8" (238.1) 6" (152.4)
Size Range:
1
/2” (15mm) to 4” (100mm) pipe
Material: Steel
Function: Recommended for the suspension of
flexible plastic pipe. Use with B3106V support
trough for plastic pipe.
Approvals: Complies with Manufacturers
Standardization Society ANSI/MSS SP-69 & SP-58
Type 1.
Standard Finish: Plain & Electro-Galvanized.
Contact B-Line for alternative finishes and materials.
Order By: Part number and finish.
B
D
C
A
(Rod Size)
Hanger Rod Not
Included
B
Overall Height
C
Center of pipe to top of hanger.
D
Rod Take-Out
Center of pipe to bottom of hanger rod.
E
Minimum thread length of hanger rod.
B3106V - Plastic Pipe Support Channel (TOLCO Fig. 1VT)
Maximum
For Nominal Steel Size Hanger Design Approx.
Pipe Sizes T x L B Spacing Load Wt./100
Part No.
in. (mm) in. (mm) in. (mm) Ft. (M) Lbs. (kN) Lbs. (kg)
B3106V-2
1
/2"to 2" (15 to 50) 18 Ga. x 96" (1.2 x 2438.4) 1
9
/16 " (39.7) 8 (2.44) 150 (.67) 449 (203.6)
B3106V-4 2
1
/2" to 4" (65 to 100) 18 Ga. x 120" (1.2 x 3048.0) 3
1
/8 " (79.4) 10 (3.05) 150 (.67) 1123 (509.4)
Size Range:
1
/2” (15mm) to 4” (100mm) pipe
Material: Steel
Function: Designed for use with B3106 as a
support for plastic or other flexible pipe systems.
Standard Finish: Pre-Galvanized. Contact
B-Line for alternative finishes and
materials.
Order By: Part number and finish.
B
T x L
Steel Size
Pipe Hangers
All dimensions in charts and on drawings are in inches. Dimensions shown in parentheses are in millimeters unless otherwise specified.
Pipe Hangers
56
Pipe Hangers & Supports