User's Instructions

Page 5
current Minutes, and press ‘SET’ once.
5. Next, the year will start to blink on the display,
press ‘UP’ or ‘DOWN’ to select the year, and
press ‘SET’ once.
6. Next, the month will start to blink on the
display, press ‘UP’ or ‘DOWN’ to select the
current month, and press ‘SET’ once.
7. Next, the date will start to blink on the display,
press ‘UP’ or ‘DOWN’ to select the date, and
press ‘SET’ once.
8. Now the time set is nished, the display will
display the time you just set.
Setting the Alarms
1. Press and hold the ‘ALM-SET’ button for three
seconds to enter Alarm Setting.
2. On the display, the hour will starting blinking.
3. Press ‘UP’ or ‘DOWN’ to select the desired
hour to be set, and press ‘ALM-SET’.
4. The minutes will start blinking
5. Press ‘UP’ or ‘DOWN’ to select the desire min-
stes to be set, and press ‘ALM-SET’.
6. Now the display will resume back on current
time.
7. Please make sure you have activated the
Alarm if u want it to ring.
Turning On Alarms
1. To enable / activate an alarm, you can press
the ‘ALM-SET’ button on the back of the
alarm clock
2. Once you enter the Alarm setting, you can
press the ‘UP’ button to enable / activate the
alarm.
3. The bell icon also appears when the alarm is
enable / activated.
4. When the Alarm is RINGING, you can press
‘UP’ or ‘DOWN’ once to turn OFF the Alarm.
Turning o Alarms
1. To disable an alarm, you can press the ‘ALM-
SET’ button on the back of the alarm clock.
2. Once you enter the Alarm setting, you can
press the ‘UP’ button to deactivate the alarm.
3. The bell icon also disappears when the alarm
is deactivated.
Backlight and Snooze Setting
1. When the alarm is active you can press the
‘SNOOZE/LIGHT’ button on top of the alarm
clock to stop the alarm, a snooze function is
activated for 5 mins.
IF you want to turn o the Alarm, press ‘UP’
or ‘DOWN’ once.
2. The snooze button also acts as the back-
light. Press the snooze button to activate the
backlight on the display. The light will remain
on for about 5 seconds and turn o automat-
ically.
Temperature Display
1. The temperature display can be displayed in
Celsius and in Fahrenheit. Press the ‘DOWN’
button to select either Celsius or Fahrenheit.
Operation
SNOOZE-LIGHT