CONTENTS General information and safety instructions Assembly and parts Getting started Operating your fridge/freezer 12/24¥ DG Operating your fridge/freezer 240V AC Temperature control Bluetooth™ connection instructions Felix Zone operation 10 Battery monitor setting 11 Using with solar panel or generator 12 Tips and suggestions 12 Maintenance and service 13 Troubleshooting 14 Specifications ANACCS_COMPO205BAN_72L_Fridge_Manwal VS_FA_150818Indd 2 166M8 am
GENERAL INFORMATION AND SAFETY INSTRUCTIONS Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Keep the manual in a safe place for future reference, along with purchase receipt and carton. If applicable, pass these instructions on to the next owner of the appliance.
ASSEMBLY AND PARTS . Lid Handle . Control Panel . Can Handles Power Input Panel . 12V/24V DG Power Cable 240V AC Power Cable . Storage Baskets . Enteral Light .
ANAGCS_COMPO205BAN_72L_Fridge_Manwal VS_FA_150818Indd GETTING STARTED INSTALLATION After unpacking the fridge/freezer check that no parts are missing. Place the unit in a dry place which is protected against splashing water. Do not place directly adjacent to sources of heat such as heating, gas ovens, hot water, pipes or directly in the sun. It is important that your appliance is installed and operated in accordance with these instructions to ensure its performance, efficiency and operation.
POWER REQUIREMENTS Tha fridge/freazer is designed to operate voltage. = AC input 240V AC at 50Hz (e.g. electrical power point} = DG input 12V or 24V DG {e.g.
= As a protection for your battery, the fridge/freezer switches OFF automatically if the power source voltage is insufficient Note: It is important that the correct cable size and gauge is used for the installation of the DC supply as over distance the voltage can decrease if the incorrect cable size and gauge cable is being used. = Always consult a qualified automotive electrician when using a DC extension cable.
TEMPERATURE CONTROL Wuhan your fridge/freezar is first connected to the AC or DC power input the appliance will automatically switch on and the LCD control pane! will display the current cabinet temperature, battery monitor and Eco setting as well as the current input voltage. = The Temperature Controller provides the ability to set the desired temperature level and display the current cabinet temperature. The electronic controller has been programmed to maintain an average of the set temperature.
. USB Outlet . Power On/0ff Button . Mode Button . Zone 1 Temperature Display . Zone 2 Temperature Display POWER 1. Press & Hold POWER button for 3 seconds to turn fridge ON 2. Press & Hold POWER button for 3 seconds to turn fridge OFF TEMPERATURE SETTING — ZONE 1 1. Press MODE once to select Zone 1 2. Display FLASHES cement temperature setting 3. Press Up / Down to set temperature 4. Display FLASHES for 3 seconds then returns to display ACTUAL temperature TEMPERATURE SETTING — ZONE 2 1.
SHUT DOWN ZONE 1 OR 2 BATTERY MONITOR SETTING 1. Press MODE to select Zone 1 or Zone 2 1. Fridge to automatically restart once input voltage is 2. Display FLASHES current temperature setting retrenched nn.d into _rein all original settings prior to o monitor being activated 3. Press Up until is displayed Audible beeping to be heard when monitor is 4. Reverse process to restart the cooling of each zone activated and the battery symbol will flash DIMMING 1.
USING WITH SOLAR PANEL OR GENERATOR USING WITH SOLAR PANELS = The power consumption and efficiency of your fridge/ freezer makes it ideal to be used in conjunction with solar panels to provide recharging of the DC power source. Solar panels will provide charge into the battery during the daylight hours even while the appliance is operating. As the output from solar panels changes depending on the level of sunlight and intensity, your fridge/ freezer cannot be connected directly to the solar panels.
ANACCS_COMPO2056AN_72L_Fridge_Marwal VS_FA_150818Indd 1 TIPS AND SUGGESTIONS = Fresh and frozen foods should not be stored right beside each other in the cabinet.
TROUBLESHOOTING ANACCS_COMPO2056AN_72L_Fridge_Marwal VS_FA_150818Indd 1 0 DILUTION Chock the unit is switched ON — Crass and hold butt for 2 to 3 seconds Check the power source (voltage may be too low) Check the parer cable and all connections from the battery to fridge/freezer Check the fuse at the Power Input Panel ‘The temperature has been set too low, therefore increase the temperature setting.
