User Manual

Network Camera_ User manual

2.15. Upgrade & Reset

You can upgrade the device via the IP network.

Upgrade is a process to renew the System Software stored in the non-volatile memory of the system.

You must restart the system by “System Restart” to run the system with the upgraded system software.

Fig. 2-14. Upgrade & Reset

Contents of the upgradable system component should be downloaded from CNB’s home page before the

system upgrade is performed.

Item Description

Manual

Upgrade

Upgrade the system manually.

System S/W

Upgrade

Upgrade the system software installed on the product via the network.

ActiveX

Firmware

Upgrade

Upgrade the system software installed on the product via the network.

Bootloader

Upgrade

Upgrade the bootloader installed on the product via the network after

getting from CNB. Generally it is not required to upgrade the Bootloader.

Add PTZ File

For the PTZ Applicable product, you can use PTZ by uploading extra

protocol. (Applicable product will get it a activated automatically)

System Variable File Upload

This loads up setting from a saved “Download template file” file.