User guide

XNET Network Video Server User’s Guide
program which is a viewing & recording program for a PC. Minimum requirement of the PC is
described below:
Minimum Recommended
CPU Pentium III 700 Pentium IV 1.2G above
Main Memory 128 MB 256MB above
Operating system
*
Windows 2,000 or later Windows 2,000 or later
Web browser Internet Explorer 5.0 Internet Explorer 5.0 above
Resolution 1,024 X 768 Higher than 1,024 X 768
Network 10 Base-T Ethernet 100 Base-T Ethernet
* Operating Systems supported : Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information
you are recommended to refer to pertinent documentations provided with the product or refer
to cnbtec’s home page (http://www.cnbtec.com)
1. Connect XNET to LAN by using one of the following method
1) If you have power adaptor with PoE, connect the network camera and PC as
illustrated in Figure 2.5. Both power and network connection is made with a single LAN
cable.
z The propriety PoE (Power over Ethernet) adds convenience in installing the network
camera by providing both power and LAN connection using single LAN cabling.
2) If you have standard power connect the network camera and PC as illustrated in
Figure 2.6.
X
NET
PoE
Injector
AC In
LAN Hub
Data + Power
CAT5 cable
Figure 2-5. Connecting Network camera and PC using PoE Adaptor
10 of 44