Ver. 1.
XNET Network Box Camera Installation Manual About this Manual A compatibility and durability test ensured this product’s high performance. This installation guide is for XNET Network Box Camera users only, and it describes operations related to XNET Network Box Camera. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before. Important Notices It is illegal to copy and distribute this manual without permission.
XNET Network Box Camera Installation Manual Index 1. About XNET ...................................................................................................................... 4 1.1. About XNET............................................................................................................................4 1.2. Features of XNET ...................................................................................................................4 1.3. Applications ............................
XNET Network Box Camera Installation Manual 1. About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as MJPEG and H.264. XNET provides stable real-time surveillance by real time video/ audio at 1080P level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices. 1.2.
XNET Network Box Camera Installation Manual 2. About the Product 2.1. Contents Please make sure the following contents are included when you open the package. Contents XNET product Description Additional info. Network Box Camera (Lens not included) Auto Iris Lens Plug Connection plug for Auto-Iris control signal Power adapter and AC power cord Input: 100~240VAC 50-60Hz Terminal Plug Power Jack CD Output : 12VDC, 2A 2P * 1ea, 6P * 1ea 2 jack Software and User’s manual 2.2.
XNET Network Box Camera Installation Manual 2.3. Functions and Designations 2.3.1. Side View Auto Iris control plug Mounting Screw Hole 1/4”. 20 UNC(20 THREAD) L : 4.5mm +-0.2mm (ISO standard) or 0.197” (ASA standard) CS Ring Fix Screw C Ring Attach both C Ring and CS Ring to use C-mount Lens Lens(Sold Separately) *Please ask at the store about purchasing lens separately. CS Ring Attach CS Ring only to use CS-mount Lens Figure 2-1.
XNET Network Box Camera Installation Manual 2.3.2. Front / Rear View MIC STATUS LED Factory Reset Power LED Figure 2-2. Network Camera Front / Rear view z STATUS LED : Indicate the status of the product EVENT LED : If the alarm out is operating, the green LED blinks. SYSTEM LED : The system operates normally when the blue LED blinks z MIC : Have built-in microphone. z LINE IN: Connects to auxiliary Audio Device. 3.5 mm mono/ stereo audio connector is used.
XNET Network Box Camera Installation Manual z NETWORK : This Ethernet terminal connects to 10Mbps or 100Mbps LAN through an RJ-45 connector. When optional PoE is used, the power will be supplied from the Network Cable. LINK : Yellow light indicates that he network is properly connected. ACT : Green light indicates that the XNET system connected to 100Mbps LAN. This green lamp will blink if the system receives data.
XNET Network Box Camera Installation Manual 2.3.3. Connecting to Alarm devices z Alarm Input Wires from various sensor type (IR, heat, and magnetic) can be connected to Alarm in(+)/(-) terminal as shown in figure 2.5. (NC or NO of sensor input can be selected at Menu screen.) Alarm Sensor device requires a separate power source. Figure 2-5. Connecting to Alarm Input z Alarm Output This terminal can only be connected up to AC 30V/400mA or DC 30V/400mA.
XNET Network Box Camera Installation Manual 3. Software Installation This section provides brief guidelines to install the XNET software quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. 3.1. Connecting XNET to network 1.A PC or a laptop computer is required to set up an IP address.
XNET Network Box Camera Installation Manual 3.2. Installing IP-Installer Software and Configuring IP address 3.2.1. About IP-Installer A unique IP address has to be configured in order to connect network camera and monitoring PC to a network. IP-Installer software provided in the Installation CD (included in the package) will configure IP address easily. If your network have a DHCP server that automatically assigns IP addresses to network cameras.
XNET Network Box Camera Installation Manual 2. Select the camera of which you wish to change the IP address and click (Set IP Address) button to bring up the following box in Figure 3-2. Figure 3-2. IP Address box 3. When you enter the IP address and click Set button, the box shown in Figure 3-3 will appear. Figure 3-3. Select Network Adapter Box 4. Select the adapter and click select button to change the IP address of the camera.
XNET Network Box Camera Installation Manual 4. Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This guide explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET Network Box Camera Installation Manual 4.2. Web Viewer Page Web viewer page consists of Video monitor screen and menu option buttons. Figure 4-2.
XNET Network Box Camera Installation Manual Item Sub Item Capture - Description Captures and saves the current image as a still picture. The image is saved as jpeg file in the following folder: C:₩xNetCapture Brings up Menu screen. Setting - Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail. Opens up PTZ page. PTZ - This page can set up digital PTZ of the network camera and control of PTZ movement.
XNET Network Box Camera Installation Manual 5. Specifications IGC2050F Camera Progressive image processing Scanning System 16:9 Progressive Pixel Clock 80MHz Image Sensor Progressive CMOS Sensor Sync. System Internal Effective Pixels Number 1920 (H) x 1080(V) 2.0 Mega Horizontal Resolution 1100 TV Lines Video Output Level Select NTSC/PAL 1.0Vp-p (BNC 75Ω, composite) Lens Mount CS Mount Min. Illumination 1.0Lux(Color, DSS On), 0.
XNET Network Box Camera Installation Manual 17 / 17
