XNET IP Dome Camera Install Guide XNET Network Dome Camera Install Guide ( IDC4050IR, IDC4050F, IDC4050VR, IDC4050VF ) Ver. 1.
XNET IP Dome Camera Install Guide About this Manual A compatibility and durability test ensured this product’s high performance. This manual is for XNET IP Dome Camera users only, and it describes operations related to XNET IP Dome Camera. Please read this manual thoroughly paying attention to cautions and warnings before using the product even if you have used similar products before. Important Notices The copyright of this manual is owned by CNB Technology Inc.
XNET IP Dome Camera Install Guide Index 1. About XNET ............................................................................................................... 4 1.1. About XNET ......................................................................................................... 4 1.2. Features of XNET .................................................................................................. 4 1.3. Applications .............................................................................
XNET IP Dome Camera Install Guide 1. About XNET 1.1. About XNET XNET is an internet based security and surveillance system that is compatible with various network conditions through easy installation and user interface as well as multi-functional compressor Codec such as H.264, MJPEG. XNET provides stable real-time surveillance by real time video/ audio at 1080P level, local storage for any network problems, and hybrid IP technology that can be used with existing analog CCTV devices. 1.2.
XNET IP Dome Camera Install Guide 2. About the Product 2.1. Contents Please make sure the following contents are included when you open the package. Contents XNET AC Power Cable POWER ADAPTOR GUIDE PATTERN CD Accessory Description Additional info. XNET IP Dome Camera 2Jack Cable INPUT : 100~240VAC 50-60Hz OUTPUT : 12VDC 2A Guide Pattern Software and User’s manual Terminal (8P) 1EA, SCREW 3EA, Wall Anchors 3EA 2.2.
XNET IP Dome Camera Install Guide 2.3. Hardware Designation 2.3.1. Switch and Controls This shows Camera module inside the dome cover.
XNET IP Dome Camera Install Guide 2.3.2 Connecting Cables Analog Video Output Use this output to monitor the analog video signal while installing. (Select Video Out at menu screen to enable this output) Power Supplies Power to the Xnet product. Use 12V DC Adapter in the package. Connect to a Monitor Connect to an Adaptor Do not use this connector when powering up the product through LAN cable.
XNET IP Dome Camera Install Guide Audio Connection MIC/Line Input (Mono) Connects to auxiliary Audio Device or microphone. Line Output (Mono) Audio signal output to a Power Amplified device or Speaker. This can be used to listen to the audio signal sent from a remote PC for Bi-directional Audio communication. ALARM Input/Output Connect to Alarm Input and Output Sensor Input : Wires from various sensor type (IR, heat, and magnetic) can be connected.
XNET IP Dome Camera Install Guide 2.3.3 Connecting to Alarm Devices Alarm Input Wires from various sensor type (IR, heat, and magnetic) can be connected to Alarm in(+)/(-) terminal as shown in figure 2.5. (NC or NO of sensor input can be selected at Menu screen.) Alarm Sensor device requires a separate power source. Internal Circuitry External Circuitry Alarm Output This terminal can only be connected up to DC 30V/400mA. An additional relay device has to be used to control higher voltage or current.
XNET IP Dome Camera Install Guide 3.Software Installation This section provides brief guidelines to install the XNET quickly and to monitor XNET’s Video and Audio signals easily. If you have questions about details not explained in this section or if the product is not functioning as described, please refer to FAQ before contacting the store. Our homepage is http://www.cnbtec.com. 3.1. Installing XNET 3.1.1. Installation Mount the Camera to a ceiling or a wall.
XNET IP Dome Camera Install Guide TILT : 90˚ FOCUS Horizontal ZOOM Rotation : 360˚ PAN : 360˚ 3.1.2. Cable Connection 1.A PC or a laptop computer is required to set up an IP address. Compatible operating system: Windows 2000/ Windows XP/ Windows Vista Since the default IP address of the device is 192.168.123.100, set up the IP address of the computer like the following: IP Address : 192.168.123.101 Subnet Mask : 255.255.255.0 2.Connect LAN cable to the Network Terminal of the product.
XNET IP Dome Camera Install Guide 3.2. Installing IP-Installer Software and Configuring IP address 3.2.1. About IP-Installer A unique IP address has to be configured in order to connect IP camera and monitoring PC to a network. IPInstaller software provided in the Installation CD (included in the package and also available to download from our website http://www.cnbtec.com) will configure IP address easily. If your network have a DHCP server that automatically assigns IP addresses to IP cameras.
XNET IP Dome Camera Install Guide B. Select the camera of which you wish to change the IP address and click (Set IP Address) button to bring up the following box in Figure 3-3. Figure 3-3. IP Address box C. When you enter the IP address and click Set button, the box shown in Figure 3-4 will appear. Figure 3-4. Select Network Adapter Box D. Select the adapter and click select button to change the IP address of the camera.
XNET IP Dome Camera Install Guide 4.Using Web Viewer Connecting to network devices can be done using internet web browser or “XNET-CMS” software. This guide explains about using internet web browser only. For instructions on how to configure network connection using XNET-CMS software, please refer to XNET-CMS Manual, which can be found in the installation CD. 4.1. Logging In Enter the IP address of the device on the address bar of your web browser and press enter key.
XNET IP Dome Camera Install Guide
(When using default IP address and port number) http://192.168.123.100 (When IP address and port number changed) http://IP address: new port number For security purpose, it is recommended to change the administrator’s id and password from their default values. Please be careful not to forget them or expose them to others. Please refer to [Web Viewer Manual] for detail.XNET IP Dome Camera Install Guide Item Sub Item Capture - Description Captures and saves the current image as a still picture. The image is saved as jpeg file in the following folder: C:₩xNetCapture Brings up Menu screen. Setting - Setup page for each XNET feature can be opened from this Menu screen. Please refer to [XNET Owner’s Manual] for detail. Main Stream When this box is checked, Main Stream Video is displayed. When this box is checked, Sub Stream Video is displayed.
XNET IP Dome Camera Install Guide 5.Specification XNET IP HD - IDC4050F / IDC4050IR / IDC4050VF / IDC4050VR Signal System Scanning System Pixel Clock Image Sensor Sync. System Effective Pixels Number Horizontal Resolution Video Output Level Camera Built-in Fixed Mega pixel Lens, f=4.0mm, F 1.8 Built-in DC Iris Vari-focal Lens, f=3 ~ 10mm, F 1.2 Min.
XNET IP Dome Camera Install Guide 18 / 18