USER GUIDE 4 Channel Digital Video Recorder This document contains preliminary information and subject to change without notice.
SAFETY PRECAUTIONS DKS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected “dangerous voltage” within the product’s enclosure that may be strong enough to cause a risk of electric shock persons. CAUTION THIS PRODUCT HAS MULTIPLE-RATED VOLTAGES (100V AND 240V).
WARNING The product should be installed by a trained professional. The DVR should be powered off when connecting camera, audio, or sensor cables. The manufacturer is not responsible for any damages caused by improper use of the product or failure to follow instructions for the product. The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for examination or attempting to fix the unit. any issues with the unit if the warranty seal is removed.
HDD INSTALLATION Screw the HDD brackets to the HDD and insert rubber rings. Fix the HDD to the chassis. Firmly insert SATA data cable and power cable to the HDD.
SYSTEM SCHEMETIC Wiring Camera Control port and Sensor input / Alarm output SENSOR INPUT: 5V TTL input. Connect two signal lines of sensor to the desired sensor number. (You can set the type-NC or NO- of sensor at “Setup” mode). ALARM OUTPUT: 5V TTL output.
TABLE OF CONTENTS 1. Introduction ..................................................................................................................................................... 9 1-1. The System .......................................................................................................................................... 9 1-2. General Features ................................................................................................................................. 9 1-3.
3-5-1. MENU > NETWORK > Address............................................................................................... 27 3-5-2. MENU > NETWORK > DDNS ................................................................................................. 28 4. Playback ....................................................................................................................................................... 29 4-1. Display.........................................................................
6-13. Setup ................................................................................................................................................ 48 6-13-1. Local setup............................................................................................................................. 49 6-13-2. Remote setup ........................................................................................................................ 49 6-14. Search ..............................................
1. Introduction 1-1. The System Thank you for purchasing the most reliable 4 channel DVR with high quality image. DVR provides better compression than current other MPEG4 DVR and best image quality, smallest packet size, DVD quality video, transmits video more efficiently over networks than any of previous technologies. The DVR guarantees the most reliable security system ever introduced in the market. The DVR brings you the most reliable and fully featured surveillance technology you have ever experienced.
1-3. Package Contents The following components are included in the DVR package: DVR SET 1. NETWORK CLIENT S/W CD 2. REMOTE CONTROLLER & BATTERY 3. MANUAL 4. ADAPTOR & POWER CABLE 5. RUBBER RINGS & SCREWS FOR HDD INSTALLATION 6. IDE HDD CABLE 7.
2. Basic Operation 2-1. Front Panel USB Port : USB ports on the front panel provides following functions: i. Backup files using USB Flash Memory ii. Control the system using an USB Mouse iii. Save/Load the system settings using an USB Flash Memory. LED Indication Power LED: LED will be on when power is supplied to the system HDD LED: LED will be on when data is being recorded or searched in HDD. NETWORK LED: LED will be on when the system is being connected via network.
: Move forward by one frame under Pause. Use this button to move upward when you set the menu. : Move backward by one frame under Pause. Use this button to move downward when you set the menu. : Play the video backward. Press the button repeatedly to increase play speed up to 32 times faster than usual (Sequence: 1, 2, 4, 8, 16, 32 times). Use this button to move left when you set the menu. : Plays the video forward.
2-3. Start the System Connecting the power cord will turn on DVR. The system initialization will take approximately 10 to 20 seconds. Once the system is initialized, it will display quad screen, and begin to record video automatically. To turn off the system, select SHUTDOWN under main menu (MENU > SHUTDOWN) and unplug the power cord when the shutdown message appears. 2-4. Menu Bar The menu bar will appear on the bottom of the screen as shown below.
2-6. User or Admin Login Press MENU to enter main menu screen. When Login screen appears, please enter ID (Admin or User) and Password. Password can be set up to 8 numbers with the combination of numbers from 1 to 4. The factory default password is „1111‟ so press OK to log in to the system. Password can be set under password set up option (MENU > SYSTEM > Password). System will be automatically log out if it is not in-use for sometime.
3. DVR Configuration 3-1. System Under system menu, System configuration options for general Information, Date &Time, Password, Storage, System Log and Back Up can be selected. 3-1-1. MENU > SYSTEM > Information In the Information screen, DVR Name, System Version, Upgrade, Mac Address and Configuration options can be selected. DVR Name: Please select DVR Name and input DVR name using the virtual keyboard.
3-1-2. MENU > SYSTEM > Data & Time In the Date & Time, Time Zone, Date, Time and NTP Server options can be selected. Highlight and press Time Zone to select right Time Zone, and please check „Use Daylight Saving Time‟ if it is applicable. Enter start and end date/time for local „Daylight Saving Time‟. Click button to set up Date and Time. Select „Use NTP‟ to enter Time Servers to be synchronized with DVR. Highlight and press to enter Time Server using the virtual keyboard.
3-1-4. MENU > SYSTEM > Storage In the Storage, HDD Format, Record Period and Smart options can be selected. When installing the HDD for the first time, the HDD should be formatted first. Highlight and press Format button to begin HDD format. Record Period: displays the information on the period of recorded data. Auto Deletion (day): Keep the recorded data for a selected day(s) from the time you set. S.M.A.R.T option allows checking the status of installed HDD.
3-1-6. BACKUP You can backup data that can be only played with Backup Viewer program. Here is the direction to generate a backup file. Please connect a flash memory drive Please press Backup button and select Backup, then you will see a screen like below. to DVR system (Using Mouse : Click the right button of mouse and select Backup at the menu) If your device information does not show up at Status, please select Update button to renew your device information.
3-1-7. Clip Maker You can also backup data as a clip that can be played with Quick Time Player, so you do not need Backup Viewer program to play clip files. Here is the direction to generate a clip file. Please connect a flash memory drive to DVR system Please press Backup button and select Clip Maker, then you will see a screen like below.
3-2. Device Under Device menu, Device configuration options for Camera, PTZ, Sensor & Motion and Alarm & Buzzer can be selected. 3-2-1. MENU > DEVICE > Camera In the Camera, Use, Covert and Title options can be selected. USE: Turn on or off connected cameras. Covert: If Covert is on, no video images will be displayed on the monitor.
PTZ control – Basic Select a channel connected with PTZ camera. Select PTZ from the contextual menu appears by clicking right mouse button. In order to control PTZ with DVR control buttons, please select a channel connected with PTZ camera and select button. : Zoom Out : Zoom In : Focus on near distance : Focus on far distance : Save Presets : Load Presets Please refer to PTZ camera manual for appropriate setting values for PTZ settings. PTZ can only be controlled in single screen mode.
3-2-3. MENU > DEVICE > Sensor & Motion In the Sensor & Motion, Sensor Type and Motion Detection options can be selected. Sensor Type: Select Sensor Type using button. NC(Normally Closed), NO(Normally Opened) The system provides Motion Detection function.
Set Alarm Duration time from 10 to 300 seconds using button. Select event type to be synch with Alarm out. The system has internal Buzzer can be synch with events. Select event type to activate internal buzzer whenever the system detects events. 3-3. Record Under Record menu, Record configuration options for Recording, Schedule, and Event can be selected. 3-3-1.
Resolution: Select recording resolution from CIF to D1. Set desired recording speed using button. Maximum recording speed can be changed depend on the recording mode. Quality: Select record image Quality from Low to Very High. Higher image quality means larger the image size. - Low: 1~2Kbytes / image (CIF, 30ips) - Standard: 2~3Kbytes / image (CIF, 30ips) - High: 3~5Kbytes / image (CIF, 30ips) - Very High: 5~7Kbytes / image (CIF, 30ips) 3-3-2.
If select Use Default Settings, the system will record at 15ips and Standard quality. The system always follow recording settings under Recording Setting menu unless specific time and recording options are set under Recording Schedule. Holiday: Press Holiday to set specific dates for Holiday setup. Set specific date by pressing Add button. Change and delete dates using and X buttons. There are some Holidays falls on different days. Therefore, they have to be updated every year. 3-3-3.
3-4. Display Under Display menu, Display configuration options for OSD and Monitor can be selected. 3-4-1. MENU > DISPLAY > OSD In the OSD, Data & Time display format, Language, Status Bar Hide can be selected. Date Display Format: Select preferred Date Display Format from the list using button. Time Display Format: Select preferred Time Display Format from the list using button.
3-5. Network Under Network menu, Network configuration options for network Address and DDNS can be selected. 3-5-1. MENU > NETWORK > Address In the Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be set for network connections. Type: Select network type of Static or DHCP.
3-5-2. MENU > NETWORK > DDNS Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or static IP address. We also provide an update mechanism which makes the hostname work with your dynamic IP address of DVR In the DDNS, network options for DDNS can be selected. Use DDNS : To decide whether using DDNS service or not Hostname: Create a hostname that points to your dynamic IP or static IP address. Use ID: To decide whether managing hostname through autoipset.com or not.
4. Playback The system provides various playback menus to search recorded data. Please click right mouse button on mouse or press playback button on the front panel. 4-1. Display Select display mode or camera from Display list or double click on a camera to bring up specific camera in full screen mode. Highlight and press Hide Status Bar to keep the status bar disappear from the screen. If you do not want to hear recorded audio, select Mute Audio. 4-2.
4-2-2. Calendar Search Calendar Search provides easy graphical search by displaying numbers (dates). Dates with recorded data will be highlighted. Once you select the date, it will display record time table below. The numbers on the top of the table shows the time frame in 24hours format, and titles on the left indicate cameras numbers. The color bar shows the full information of recorded data on the selected date. Move the indicator (line) to select specific recorded time of the selected date.
All : System displays every events Motion : System displays every events related to Motion Sensor : System displays every events related to Sensor Once find specific list of event, move up and down button to highlight the log and press playback the data, and press button to button to play. 4-2-4.
5. Web Viewer User can access to use DVR‟s Setup, Live Web Monitoring, Playback functions through Internet Explorer. 5-1. Login User can access to the DVR‟s Remote Monitoring System if user inputs DVR‟s IP address or its registered hostname at Internet Explorer‟s address bar. Ex) Web port is 80(Default value) – http://hostname.autoipset.com or 211.104.176.143 Ex) Web port is not the default value – http://hostname.autoipset.com :Web port or 211.104.176.143:Web port Ex) http://hostname.autoipset.
: One Channel View Mode. : Change the display channel at One Channel View Mode. : Quad View Mode. : Full screen View Mode. Setup: Changed the DVR configuration.(Only for administrator) 5-3. Playback User can search and play the DVR‟s recorded data.
5-3-1. Calendar Search User can select a specific time to search for the recorded data at the calendar. As you see the picture, date marked as red color if there is recorded data on the calendar. In addition, selected date marked as yellow color. , : Change month / year : Search data by inputting specific time. : Refresh the DVR‟s recorded data information. 5-3-2. EVENT Search User can search recorded events data through the Event Search function.
6. HDxViewer HDxViewer can manage a number of DVR (maximum 16) as integrated through network. HDxViewer can indicate video of DVR systems connected to network in 64 video channel screen at maximum and utilize various functions such as setup, PTZ control, preset setup, search (remote/local), EMap. ① indicates current date, time, day of system where HDxViewer is installed.
2. Please select Server List menu like below. 3. Please select Add button and input user’s DVR server information at Server Management window.
4. Please select Add button to save user’s DVR server information. Please select the newly added Server on the list, then select Connect button. Server Name: Please input server name that you want to use Server Address: Please input DVR IP address or DDNS hostname (You can check DVR IP address or DDNS host name at DVR menu-address or DDNS.) Access Port: Please input DVR access port number. (Default port number: 10101) User ID: Please input user ID that is the same as DVR login ID – Default : admin.
6-1-2. Search User can search and play the recorded videos with HDxViewer. 1. Please select search button after accessing to DVR. 2. Please select a DVR server to search at Select remote, then press OK button. 3. Please select the specific time, such as date, hour, and minute, to search like below.
4. Please click Play button to view recorded videos. 5. Please select Live button to go back to live monitoring mode. 6-1-3. Setup User can set DVR configuration remotely with HDxViewer. 1. Please select setup button after accessing to DVR.
2. Please select a DVR server to setup at Select remote, then press OK button. 3. User can set DVR configuration with the same environment like DVR. Please select X button to close setup window.
6-2. Server list indication It indicates server name, IP address, camera and sensor registered in HDxViewer. It indicates the status of servers (connection and event) and devices (cameras, sensors and alarms). 6-3. Program shutdown, volume, PTZ control, server connection & disconnection Program shut down button. If you click button, authentication window to close HDxViewer will run.
6-5. LCD window and log It in text form indicates the status of server connected with. According to setup of server and HDxViewer, log exists or not. It indicates the storing, network, and HDD from the left. It indicates the current status of network. View event the button. If you click button, event log viewer will run. 6-6. Single channel player, network recording and preset Single channel player button If you click button after selecting channel, a window to see single channel will run.
6-7. Authentication You must be authorized in authentication window to use HDxViewer. You can run log on, log off, program shut down, program minimize, system off and system restart. „log on/off‟ button in system setup in setup, If program starts with check on in authentication window will run if any part of HDxViewer program including program shut down button is clicked. ‟log on/off‟ button is checked, authentication window will run when If „program shut down‟ button is clicked.
6-9. Server list You can select menu by click of right button of mouse. View connected DVR If you click button, it indicates list of only connecting servers in server list. View name / View address / View IP If you click each button, the list can be in name, address and IP address. The above is an example selected as name indication. Connection / Disconnection If you click each button, it will connect and disconnect to server.
Start view camera -> Start view camera End view Camera -> End view Camera Menu is enabled or disabled. Start recording / End recording If you click each button, you can record video or not. According to recording status, it changes into: Start recording -> Start recording End recording -> End recording Menu is enabled or disabled. Alarm on / Alarm off If you click each button, you can activate alarm or dissolve.
6-9-2. Server disconnection 1) Click the connected server 3) Connection is cancelled and icon shape changes ( 2) Click the button to disconnect ). 6-9-3. Connect all servers 1) If menu is indicated by click on right button of mouse on server list, click 'All connection‟. 2) Icon of connected server is changed. 3) If you click 'disconnect all' button in menu, it will disconnect all servers.
6-9-4. Watching video 1) If you double-click camera of connected server, you can watch video. : Video is output in channel. : Video is not being output in channel. : Video is being recorded in the system where HDxViewer is installed. 6-9-5. Not watching video 1) If menu is indicated by click on right button of mouse on camera with video, click 'stop watching camera' button. (or double-click camera icon in tree control) 2) Video of camera gets hidden and icon changes.
6-11. Single channel player If you click 'single channel player button, single channel player window will run. It offers saving full motion, still shot capture, PTZ control, live screen and full screen 6-12. Preset If you click 'add preset' button, you can save the current screen status. (If clicked, add preset window will run and add preset.) If you click 'edit preset' button, preset setup window will run and can edit/add/delete.
6-13-1. Local setup If you click „setup‟ button, setup selection window will run. HDxViewer setup window will run if server is not connected at all. If you click 'OK' after clicking on 'local selection', HDxViewer setup window will run. Only system administrator can do setup. 6-13-2. Remote setup If you click the 'setup' button, setup window will run. Without any server connected, HDxViewer setup window will run.
6-15. Backup Viewer Backup data can be played with Backup Viewer program. Please connect memory stick that holds backup data before running Backup Viewer Program. Using this button user can load backup data. If user succeeds to load a file, recorded date for backup data will be marked at calendar like below. This color indicates the date the backup data exists. This color indicates the user selecting date. If user selects the colored date on calendar, recorded camera numbers will be marked like below. .
6-16. Local Viewer Network recorded data from HDxViewer can be played with Local Viewer program. Please select the network recorded server name after running Local Viewer Program. Using this button user can load backup data. If user succeeds to load a file, recorded date for backup data will be marked at calendar like below. This color indicates the date the backup data exists. This color indicates the user selecting date.
The button to save image. If you click button, current playback image is captured and still image window runs. The button to save in AVI It can save current video as a motion video file. Usage: 1. Play video where user want to save from as AVI and click save AVI button. 2. User should play video until it reach the end of video where user want to save as AVI. 3. Even though user increases play speed, AVI file is saved normally. 4. If user click stop button, saving to AVI process will be done.
APPENDIX A-1. DDNS(Dynamic Domain Name Server) Dynamic DNS (DDNS) allows you to create a hostname that points to your dynamic IP or static IP address (IP Camera, DVR, and Web Server). We also provide an update mechanism which makes the hostname work with your dynamic IP address of DVR. You can use DDNS service after signing up for autoipset.com or without signing up process. A-1-1. Use DDNS service after signing up for autoipset.com 1. Sign up for autoipset.
Please fill up the blank with correct information, and then click submit button. You should check the duplication of your user ID by clicking “Check ID” before submission. 2. Log in Please log in with your ID and Password. After you log in, you can see the list of your registered DVR like below at the product list.
3. DDNS registration Please select DDNS menu at your DVR with the following route. DVR > MENU > NETWORK > DDNS First, please input a hostname that you want to use, and then please select the check box for Use ID. Next, please input ID and Password that you registered at autoipset.com, and then please click “Update” button. Finally, if you see the message, “DDNS: Succeeded in updating”, then all the registration process is done. 4.
A-1-2.Use DDNS without signing up for autoipset.com Please select DDNS menu at your DVR with the following route. DVR > MENU > NETWORK > DDNS Please input a hostname that you want to use, and then please click “Update” button. If you see the message, “DDNS: Succeeded in updating”, then all the registration process is done.
A-2. Compatible HDD models 3.
A-3. Specifications [Video] Input Composite 4CH, 1.0Vp-p, 75Ω, NTSC / PAL Output Main Monitor Composite 1CH BNC, 1.0Vp-p, 75Ω, NTSC / PAL 1 CH VGA Loopback Output 4CH BNC 1.0Vp-p, 75Ω [Audio] Input & Output 1CH Line input / 1CH Line output Aduio Codec ADPCM [Recording] Compression Format H.264 Baseline Profile (MPEG4 Part10) Compression Rate 4 Step Selectable Frame Rate Realtime mode CIF : MAX. 120 / 100 fps D1 : Channel 1 select only (NTSC/PAL) Triplex mode CIF : MAX.
