Air Purification System CLI-AP30 | Installation & Operating Instructions
Congratulations on your purchase of a Cli~Mate Air Purification System This Air Purifier improves the quality of the air in your home by helping to eliminate airborne matter such as allergens, microbes and unpleasant odours. Note: Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference. The system must be properly installed and located in accordance with the installation instructions before it is used.
SAFETY PRECAUTIONS Read all instructions carefully. • All components need to be installed in accordance with the user manual instructions for correct performance of unit. • This appliance should be used in conjunction with a safety switch.
PRODUCT FEATURES Ionizer Filters In addition to the filters, this air purifier generates negatively charged oxygen molecules (different than ozone) which attach to particles in the air which makes it easier for the air purifier to trap. Airborne particles are attracted to the negative ions in an effect similar to static electricity. The 3 layer filter contains a pre-filter, a HEPA filter and an activated carbon filter.
Component identification 1. Display panel 2. Control buttons 3. Air outlet cover 4. Hidden handles 5. Remote control 6. Air inlet 7. Ionizer 8. Pre-filter, HEPA and active carbon filter 9. UV TiO2 photocatalyst filter 10.
CONTROL PANEL/BUTTONS REMOTE CONTROL 1. Speed options Allows selection for desired speed setting- turbo, high, low and sleep. Default setting at low speed I. Filter timer reset button Press and hold for 3 seconds to reset filter timer On/off II. Child-safety lock III. Auto-mode IV. Speed options 2. Power button Turns unit on/off V. Sleep mode 3. Timer options To set automatic off timer at 1, 4 or 8 hour settings Note: VI.
DISPLAY PANEL 1. Power Indicator Illuminates blue when power is ON Filter Change Indicator Light will flash blue when filter needs to be changed Child-Lock Function Indicator Illuminates Green when Child Safety Lock is ON 2. Fan Speed Indicator a. b. c. d. Turbo speed High speed Low speed Sleep (Ultra-quiet mode) e. f. g. 1 hour 4 hours 8 hours 1. 3. Timer Indicator 4. Automatic Mode Indicator Red - Poor air quality Purple - Moderate air quality Blue - Good air quality 2. a. b. c. 3. d. e.
Product Specifications Model Code Dimensions (mm) Coverage area Power consumption Net weight Gross weight Germicidal UV-C light Air Purifier CLI-AP30 H679 x W394 x D153 Up to 25m2 55 watts 7.2 kg 8.4 kg 8W/253.7nm Air flow 176m3/h Air change per hour 30m3 x 6 Clean air delivery rate Ozone release rate 105cfm (smoke) Less than 0.05PPM Noise level in Turbo Mode <58dB Noise level in Sleep Mode <28dB Replacement filter CLI-RF-AP30 OPERATION INSTRUCTIONS 1.
Good air quality Moderate air quality Poor air quality Indicator light Blue Purple Red Operating speed Sleep Low High 6. To activate CHILD-LOCK function, press on the remote control. ‘CHILD LOCK’ light on the unit will be lit when this feature is activated. This function will lock the control buttons on the unit and remote control Note: To deactivate the CHILD LOCK function, hold the button on the remote control for 3 seconds until the CHILD LOCK LED light on the unit extinguishes.
CLEANING AND MAINTENANCE CLEANING THE PRE-FILTER Before carrying out any maintenance or cleaning of the unit, make sure that the power to the unit is turned off and power cord is unplugged from the power socket. It is recommended that the Pre-filters (the removable white layer) are cleaned every 1-2 weeks of unit operation, depending on the air quality of the room External cleaning of unit: To clean the Pre-filter: • Do not clean unit with any abrasive cleaning agents or solvents 1.
CLEANING THE HEPA AND ACTIVATED CARBON FILTER REPLACING FILTER It is recommended that the HEPA and activated carbon filters are cleaned every 100-500 hours of unit operation, depending on the air quality of the room. When the lifespan of the 3-layer filter reaches it end, the POWER light will flash blue, indicating that it needs to be changed. Discard the old filter and replace with a new one. It is not reusable.
TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem Possible Causes What To Do No Power 1. Unit is not plugged into wall socket. 1. Check connection to wall socket. 1. Air ventilation around unit not sufficient 1. There must be at least 30cm between unit and wall or other appliances 2. Air inlet or air outlet is being obstructed or blocked by foreign objects 2. Ensure there are no object obstructing the air inlet or air outlet 3.
Problem The remote control does not work Odour coming from the air outlet Possible Causes What To Do 1. Battery could be dead, depleted or not correctly installed 1. Replace battery. Ensure the battery is correctly installed 2. Remote is not pointed directly at the unit 2. Aim the remote at the small square in the middle of the control display 3. Remote control distance is out of range 3. Remote effective distance approx. 5m 1. Filter may be heavily soiled and due for replacement 1.
Your Aquaport 12 Month Repair or Replacement Warranty Conditions of this Warranty: Aquaport warrants this appliance to the first purchaser and subject to the stated conditions: 1. This product has been fully installed in accordance with the user manual installation instructions. Warranty covers any defects in material or workmanship in the manufactured product within the first twelve months from the date of purchase. 2.
INSTALLATION AND OPERATING INSTRUCTIONS 13
CUSTOMER HOTLINE: 1300 764 325 Aquaport Corporation Pty Ltd PO Box 81 Findon SA 5023 Australia Telephone: 08 8354 0711 Facsimile: 08 8354 0722 Email: aquaport@aquaport.com.au Web: www.cli-mate.com.
