TL100 TV Listener
WHAT’S IN THE BOX? TL100 transmitter TL100 headset Power adapter and cord (2 sets) RCA stereo Cable (for option 1) headphone cable (for option 2) Your new Clarity TL100 TV Listener is ready to provide high quality television sound. Setup is easy and should take just a couple of minutes. *Clarity TL100 Headset is Plantronics BackBeat® SENSE, optimized for TV listening.
BASIC SETUP STEP 1 Before connecting power to the transmitter, connect the transmitter to your TV, cable box, or satellite box, by choosing one of the two options below. TL100 Transmitter Option 1 (recommended, if available): Plug the red and white ends of the RCA stereo cable from the transmitter into the corresponding red and white audio output jacks on the back of your TV or on the back of your cable or satellite box.
STEP 1 (continued) TL100 Transmitter R L Line In HEADPHONES TV SIDE 4 Audio In Power Option 2: Plug the headphone cable into the headphone jack on your TV. On most televisions, this disables the television’s speakers, so this option is not ideal for multiple viewers. Check the settings on your TV for available functionality.
STEP 2 Plug one of the supplied power adapters into a power outlet, then plug the loose end of the power cable in the back of the transmitter. The light atop the transmitter will blink red three times to indicate that it has power, then starts blinking blue (searching for the headset). STEP 3 Please make sure the headset is within range of the transmitter (up to 30ft).
USING YOUR HEADSET Identify all controls of your headset according to the diagram below; see descriptions of functions on the next page (page 7). [ ]= HEADSET ADJUSTMENTS: Toggle the Volume +/- wheel forward or backward to control the volume. Tap the red Mute button to hear your natural surroundings. Tap the button again to 6 return to listening to your TV.
Adjust the headset to fit your head comfortably by pulling downward gently on each side, until the earphone cushions fit comfortably over each ear.
PAIRING TO YOUR BLUETOOTH®-ENABLED MOBILE PHONE 1. Turn headset off, then turn back on; press the Call button once ([ ]). 2. On the right earpiece of the headset, slide and hold the power switch towards the Bluetooth icon until the LED’s under the Call button ([ ]) flash red and blue. 3. Activate Bluetooth on your mobile phone and set it to search for new devices. iPhone: Settings > Bluetooth > On Android: Settings > Bluetooth: On > Scan for devices NOTE: Menus may vary by device. 4.
Make/Answer/End Calls: 1. To make a call: press the Call button ([ ]), then dial the number from the mobile phone. 2. To answer a call: you will hear an incoming call alert while listening to the TV. Press the Call button to answer. TV audio is muted during the call; streaming audio from the mobile phone is muted and paused. 3. To end a call: press the Call button to end the call. Headset returns to TV listener mode or resumes audio from mobile phone, respectively. 4.
CHARGING Use the second power adapter and cable to charge your headset. It takes up to 2.5 hours to fully charge your headset. The LED’s turn off once charging is complete. To check the headset’s battery status, tap the Call button [ ] while wearing your headset. Headset must be in idle state. Your headset have up to 18 hours of listening time.
en Safety Instructions To reduce the risk of fire, electric shock, injury to persons and damage to property, read all operating instructions and the following safety instructions before using your Clarity product. Operating, storage and charging temperature is 10˚C to 40˚C (50˚F to 104˚F). • Only use those Clarity products and accessories designed for use with this product. • If you experience a skin irritation after using this product, discontinue use and contact Clarity. • CHILDREN.
your hearing, some hearing experts suggest that you: 1. Set the volume control in a low position before putting your headset/ headphones on your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. Whenever possible, use your headset/headphones in a quiet environment with low background noise. 3. Limit the amount of time you use headsets/headphones at high volume levels. 4.
fr Consignes de sécurité Pour réduire les risques d’incendie, de décharge électrique, de blessure corporelle et de dommages à la propriété, lisez toutes les instructions d’utilisation et les consignes de sécurité qui suivent avant d’utiliser votre produit Clarity. • Pour le fonctionnement, le rangement et le chargement de votre produit, maintenez-le à des températures comprises entre 10˚ C et 40 ˚C (50˚F à 104˚F). • Utilisez uniquement des produits et accessoires Clarity conçus pour votre produit.
utilisez ainsi que ses paramètres modifient le volume. Si vous ressentez une gêne auditive, arrêtez d’utiliser l’appareil avec les écouteurs et consultez un médecin. Pour protéger votre audition, voici ce que des experts en matière d’audition recommandent : 1. Réglez le volume à bas niveau avant de placer les écouteurs sur vos oreilles et conservez le niveau sonore le plus bas possible lorsque vous l’utilisez. 2. Évitez d’augmenter le volume pour vous isoler des bruits qui vous entourent.
/ ou endommager le produit. • Ne jetez pas le produit au feu et ne l’exposez pas à une chaleur excédant 40 °C (104 °F). • RECYCLAGE Le produit doit être recyclé ou mis au rebut de façon appropriée. Contactez votre centre de recyclage local pour l’enlèvement de la batterie et l’élimination appropriée. Registering Your Product Visit http://shop.clarityproducts.com/support/warranty_registration to register your product online so we can provide you with the best service and technical support.
a Divsion of Plantronics, Inc. Clarity 6131 Preservation Dr. Chattanooga, TN 37416 United States ©2016 Plantronics, Inc. Clarity and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries. TL100 is a trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. iPhone is a trademark of Apple Inc. registered in the US and other countries.
