INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Large Hospitality Table Stand Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description STLU
STLU Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions STLU DIMENSIONS ADJUSTABLE ROTATION STOPS AT 15 , 30 , 45 AND 90 600mm 23.62in MAX WIDTH 8mm .33in 2.00deg ROLL ADJUST ON OFFSET SLOTS 400mm 15.75in MAX HEIGHT 397mm 15.61in .50 [13mm] OFFSET MOUNTING HOLES 113mm 4.47in 140mm 5.
STLU Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevesti
Installation Instructions STLU TOOLS REQUIRED FOR INSTALLATION 5/16" 7/16" (11.
STLU Installation Instructions Assembly to Desk 1. Use four 1/4-20 x 1/2" button head cap screws (H) to secure table stand (B) to table stand interface (C). (See Figure 1) 5 front of mount NOTE: If roll adjustment is desired, install through screws through rotational slots rather than the standard slots.
Installation Instructions STLU NOTE: Prior to installing display, the rotation radius should be adjusted. Once the display is connected, it will no longer be possible to adjust the rotational stop without removing the display from the mount. 9. CAUTION: Using screws of improper diameter may damage your display! Proper screws will easily thread into display mounting holes. Use the 5/32" security hex key (W) to loosen rotational stop adjustment screw until desired radius is achieved.
STLU 5. Installation Instructions Place vertical interface brackets (D) on display, ensuring: (See Figure 6) Cable Management • • The STLU can be set up for two types of Cable Management. One calls for the cables to be routed strictly through the pole portion of the table stand. The other routes the cables through the pole and through a pre-drilled hole in the desk. Upper hooks are towards top of display.
Installation Instructions STLU 9
STLU 10 Installation Instructions
Installation Instructions STLU 11
STLU Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002058 Rev 04 2012 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 04/12 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
