INSTALLATION INSTRUCTIONS FUSION PORTRAIT MICROADJUSTABLE LARGE TILT MOUNT Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description LTMPU
LTMPU Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions LTMPU DIMENSIONS NOTES: 3.94 100.0 5.90 149.7 8.10 205.9 10.75 273.1 0 0.0 3.94 100.0 MIN SCREEN MOUNTING PATTERN WIDTH 7.874" (200 mm) 5.90 149.7 10.75 273.1 MAX SCREEN MOUNTING PATTERN 20.7" (525.8 mm) WIDE X 31.5" (800.1 mm) HIGH 8.10 205.9 NOT RECOMMENDED FOR SINGLE STUD MOUNTING MAX SCREEN SCREW SIZE 8 mm 8.00 203.2 3.81 96.8 0.50 12.7 0 0.0 0.50 12.7 3.81 96.8 8.00 203.2 MAX MOUNTING PATTERN IS 21.6" (548.
LTMPU Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/16” (included) M5 (included) #2 7/32” (5.5mm) Wood Stud 3/8” (9.
Installation Instructions LTMPU INSTALLATION 5. The LTMPU mounts are designed to be mounted to an 8" concrete, 8"x8"x16" concrete block or 2" x 4" wood studs (16" on center) wall. The LTMPU has brackets which allow the TV to be tilted. Using a level, mark the wall on each stud to attach the mount through the upper mounting slots.
LTMPU Installation Instructions WARNING: EXPLOSION AND FIRE HAZARD! CUTTING 6 9 x4 x OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY! ALWAYS make certain area behind mounting surface is free of gas, water, waste, or any other plumbing before cutting, drilling, or installing fasteners. 6 (E1) x 2 5 10 7 9 (E2) x 2 (E3 x 4) 10 (E3 x 4) (E2) x 2 7 Figure 3 6. Drill one 7/32” (5.5mm) pilot hole in each stud. 7.
Installation Instructions LTMPU Attaching Display Brackets to Display Attaching Uprights to Display Brackets 1. 1. Horizontally align the center of the display brackets (D) with center of screen. (See Figure 5) NOTE: The notch in the top and bottom of the display bracket Vertically align the center of the uprights (B and C) with center of screen. (See Figure 6) NOTE: The diamond-shape opening in the uprights (B and C) (D) corresponds to the center of the bracket.
LTMPU Installation Instructions Attaching Display to Wall Mount 1. Push upright brackets tabs all the way down so that the lower mounting slot is blocked. (See Figure 8) 2. Hang the top hook of upright brackets onto the top bar of the mount. The bottom of the screen will be away from the wall. 3. Route cables between wall and bars. (Screen not shown for clarity) 1 2 CAUTION: PINCH POINTS! Keep fingers, hands and cables out of pinch point areas.
Installation Instructions LTMPU Locking Mount (Optional) Add padlock (not included) to upright bracket tab to lock the LTMPU mount.
LTMPU 10 Installation Instructions
Installation Instructions LTMPU 11
LTMPU Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002374 Rev03 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 07/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
