INSTALLATION INSTRUCTIONS Medium Panel Pole Mount JPP SERIES
JPP SERIES Installation Instructions DISCLAIMER Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions JPP SERIES LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Beves
JPP SERIES Installation Instructions TOOLS REQUIRED FOR INSTALLATION 5/32" 3/16" PARTS I/M x1 Interface Bracket Kit (including hardware) x1 4 B (1) A (1) C (3) 1/4-20 x 1-1/4"
Installation Instructions JPP SERIES INSTALLATION WARNING: IMPROPER INSTALLATION CAN LEAD TO IMPORTANT ! : The following installation instructions assume that a 1-1/2" NPT pipe has been properly installed and is in place. 1. 2. ELECTRIC SHOCK OR DAMAGE TO EQUIPMENT! Screw length must not exceed the depth of threaded mounting insert in display. Determine approximate location for mount keeping in mind display size, extension, height adjustment (if applicable), and pitch/roll requirements.
JPP SERIES Installation Instructions 2. Align two screws in display back with upper mounting holes in Centris cup and lower display until screws are seated in lower area of teardrop mounting holes. (See Figure 4) 3. Install two more of the same screws through lower mounting holes in Centris cup and into display back. (See Figure 4) 4. Tighten all hardware. 5. Route cables and wires to display. 2 3 Figure 5 4 x2 Figure 4 ADJUSTMENTS To adjust display Roll, Pitch, and YAW tension: 1. 2. 3. 4. 5.
Installation Instructions JPP SERIES 7
JPP SERIES Installation Instructions USA/International Chief Manufacturing, a products division of Milestone AV Technologies Europe 8832-000238 RevC 2009 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 11/09 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.
