Installation Guide

25
ABS 17112 1
1
⁄2 ” x10’ 12495 2590 1.900 0.145 30.80
ABS 17112 1
1
⁄2 ” x20’ 12494 5180 1.900 0.145 30.80
ABS 17200 2 ” x10’ 12497 1670 2.375 0.154 42.22
ABS 17200 2 ” x20’ 12496 3340 2.375 0.154 42.22
ABS 17300 3 ” x10’ 12499 750 3.500 0.216 83.50
ABS 17300 3 ” x20’ 12498 1500 3.500 0.216 83.50
ABS 17400 4 ” x10’ 12501 480 4.500 0.237 119.30
ABS 17400 4 ” x20’ 12500 960 4.500 0.237 119.30
>> ABS Plus® Schedule 40 DWV Pipe (For Non-Pressure Applications)
ABS Plus is a registered trademark of Charlotte Pipe and Foundry Company.
ABS Plus
®
Foam Core DWV Pipe
ABS PLUS
®
SCHEDULE 40 DWV PIPE (BLACK) PLAIN END ASTM F 1488
PART NO. NOM. SIZE UPC # QTY. PER AVG. OD (IN.) MIN. WALL (IN.) WT. PER
611942- SKID 100 FT. (LBS.)
NSF Listed. Meets All Requirements of ASTM F 1488.
All products manufactured by Charlotte Pipe and
Foundry Company are proudly made in the U.S.A.
NOT FOR PRESSURE
Do not use PVC / ABS / ABS Plus
®
cellular core (foam core) pipe
for pressure applications. The use of cellular core pipe in
pressure applications may result in system failure and
property damage.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe or
fittings for water or approved chemicals.
• Refer to warnings in PPFA User Bulletin
4-80 and ASTM D 1785.
PRODUCT DATA